Properties
General
| Property | Value | Comment |
|---|---|---|
Carbon equivalent (CEV) | 0.4 [-] Show Supplier Material materials with Carbon equivalent (CEV) of 0.4 [-] | max. |
Dimension
| Property | Value |
|---|---|
Dimensions | For mill finish, coils in thicknesses greater than 20 mm can also be produced. Please contact us. Please feel free to check the figure on the right side of the material page for more details. |
Mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Charpy impact energy | -20 °C | 27 J Show Supplier Material materials with Charpy impact energy of 27 J | min. | for thickness 6-20 mm |
Elongation | 15 % Show Supplier Material materials with Elongation of 15 % | min. | for thickness 1.5-2 mm | Transverse, A80 | |
16 % Show Supplier Material materials with Elongation of 16 % | min. | for thickness 2-2.5 mm | Transverse, A80 | ||
17 % Show Supplier Material materials with Elongation of 17 % | min. | for thickness 2.5-3 mm | Transverse, A80 | ||
21 % Show Supplier Material materials with Elongation of 21 % | min. A5.65√So | for thickness 3-20 mm | Transverse | ||
Tensile strength | 410 - 560 MPa Show Supplier Material materials with Tensile strength of 410 - 560 MPa | for thickness 3-20 mm | Transverse | |
430 - 580 MPa Show Supplier Material materials with Tensile strength of 430 - 580 MPa | for thickness 1.5-3 mm | Transverse | ||
Yield strength | 265 MPa Show Supplier Material materials with Yield strength of 265 MPa | min. | for thickness 16-20 mm | Transverse | |
275 MPa Show Supplier Material materials with Yield strength of 275 MPa | min. | for thickness 1.5-16 mm | Transverse |
Chemical properties
| Property | Value | Comment |
|---|---|---|
Aluminium | 0.02 % Show Supplier Material materials with Aluminium of 0.02 % | min. |
Carbon | 0.18 % Show Supplier Material materials with Carbon of 0.18 % | max. |
Copper | 0.55 % Show Supplier Material materials with Copper of 0.55 % | max. |
Manganese | 1.5 % Show Supplier Material materials with Manganese of 1.5 % | max. |
Nitrogen | 0.012 % Show Supplier Material materials with Nitrogen of 0.012 % | max. |
Phosphorus | 0.025 % Show Supplier Material materials with Phosphorus of 0.025 % | max. |
Silicon | 0.03 % Show Supplier Material materials with Silicon of 0.03 % | max. |
Sulfur | 0.02 % Show Supplier Material materials with Sulfur of 0.02 % | max. |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Structural steels are mainly used in the building industry and in mechanical engineering. Applications include building components, containers, storage tanks and roll formed profiles. Since 1 July 2013, the Construction Products Regulation (Regulation (EU) No. 305/2011 – CPR) has required that CE marking be affixed to all products delivered in accordance with a harmonised standard (e.g. EN 10025). This CE marking guarantees, for the uses defined in the standard, the properties described in the declaration of performance submitted by the manufacturer. All of the steels in this data sheet comply with this Regulation. The corresponding declarations of performance are available on our website at http://dop.arcelormittal.net/index.php | |
| Chemical composition | The above chemical properties are based on cast analysis data. | |
| Coating | Galvanisation: Class 1 | |