M530YS-65A AM FCE

Alternative and trade names
HLE65

Want to keep this datasheet? Save it now in your required format

Description

Non-oriented fully processed high strength grade has not only guaranteed magnetic properties but also guaranteed mechanical properties. Typical for this grade is higher strength values compared with the standard grades, both at room temperature and at higher temperature operating conditions. Full magnetic characterisation curves at different frequencies are available on request.

This high strength grade withstands stronger mechanical forces than the standard grades. It is therefore an excellent compromise when a combination of high mechanical strength and low magnetic losses is required.

This material data has been provided by ArcelorMittal.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

All categories

Properties

General

Property	Value
Density	7.6 g/cm³ Show Supplier Material materials with Density of 7.6 g/cm³

Mechanical

Property	Value	Comment
Elongation	15 % Show Supplier Material materials with Elongation of 15 %	min. \| Guaranteed \| Transverse \| A80
	20 - 30 % Show Supplier Material materials with Elongation of 20 - 30 %	Typical values \| Transverse \| A80
Hardness, Vickers	205 - 235 [-] Show Supplier Material materials with Hardness, Vickers of 205 - 235 [-]	Typical values
Tensile strength	590 MPa Show Supplier Material materials with Tensile strength of 590 MPa	min. \| Guaranteed \| Transverse
	610 - 660 MPa Show Supplier Material materials with Tensile strength of 610 - 660 MPa	Typical values \| Transverse
Yield strength	480 MPa Show Supplier Material materials with Yield strength of 480 MPa	min. \| Guaranteed \| Transverse
	495 - 545 MPa Show Supplier Material materials with Yield strength of 495 - 545 MPa	Typical values \| Transverse
Yield to strength ratio	0.8 - 0.85 [-] Show Supplier Material materials with Yield to strength ratio of 0.8 - 0.85 [-]	Typical values

Magnetic

Property	Value	Frequency	Comment
Guaranteed core loss	5.3 W/kg Show Supplier Material materials with Guaranteed core loss of 5.3 W/kg	50Hz	max. at 1.5 T
Guaranteed polarization	1.62 [-] Show Supplier Material materials with Guaranteed polarization of 1.62 [-]		min. \| at 5000 A/m

Technological properties

Property

Application areas

High strength values, combined with low losses and good permeability, make this grade particularly suitable for high-speed rotating machines.

Coating

This standard grade is available non-insulated or varnished with any of the coating types described in the following link https://industry.arcelormittal.com/catalogue/D28/EN .

Other

The above properties are obtained without heat treatment after stamping. The material as supplied possesses all the required magnetic properties.

Dimensions:

	Before side trimming		Side trimmed		Slit coils		Sheet length 400 to 2500 mm
	Min width	Max width	Min width	Max width	Min width	Max width	Min width	Max width
M 530YS-65 A AM FCE	1030	1230	600	1200	250	600	400	1100
M 530YS-65 A AM FCE	1030	1230	600	1200	250	600	400	1100

M530YS-65A AM FCE

Description

Ashby charts

Materials by this supplier

Properties