Properties
General
| Property | Value | Testing Standard |
|---|---|---|
Density | 1.07 g/cm³ Show Supplier Material materials with Density of 1.07 g/cm³ | ISO 1183-1 |
Mechanical
| Property | Temperature | Value | Testing Standard | Comment |
|---|---|---|---|---|
Elastic modulus | 2 GPa Show Supplier Material materials with Elastic modulus of 2 GPa | ISO 527-1/2 | 1 mm/min | |
Elongation | 30 % Show Supplier Material materials with Elongation of 30 % | ISO 527-1/2 | 50 mm/min | |
Elongation at yield | 3.7 % Show Supplier Material materials with Elongation at yield of 3.7 % | ISO 527-1/2 | 50 mm/min | |
Flexural modulus | 2 GPa Show Supplier Material materials with Flexural modulus of 2 GPa | ISO 527-1/2 | 2 mm/min | |
Flexural strain | 15 % Show Supplier Material materials with Flexural strain of 15 % | ISO 527-1/2 | 50 mm/min | |
Flexural strength | 70 MPa Show Supplier Material materials with Flexural strength of 70 MPa | ISO 178 | 2 mm/min | |
Hardness, Ball Indentation | 85 MPa Show Supplier Material materials with Hardness, Ball Indentation of 85 MPa | ISO 2039-1 | ||
Impact strength, Charpy notched | -30 °C | 30 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 30 kJ/m² | ISO 179-1eA | |
23 °C | 40 kJ/m² Show Supplier Material materials with Impact strength, Charpy notched of 40 kJ/m² | ISO 179-1eA | ||
Impact strength, Izod notched | -30 °C | 34 kJ/m² Show Supplier Material materials with Impact strength, Izod notched of 34 kJ/m² | ISO 180-1A | |
23 °C | 42 kJ/m² Show Supplier Material materials with Impact strength, Izod notched of 42 kJ/m² | ISO 180-1A | ||
Tensile strength | 37 MPa Show Supplier Material materials with Tensile strength of 37 MPa | ISO 527-1/2 | 50 mm/min | |
Yield strength | 45 MPa Show Supplier Material materials with Yield strength of 45 MPa | ISO 527-1/2 | 50 mm/min |
Thermal
| Property | Value | Testing Standard | Pressure | Comment | |||
|---|---|---|---|---|---|---|---|
Coefficient of thermal expansion | 9e-05 1/K Show Supplier Material materials with Coefficient of thermal expansion of 9e-05 1/K | ISO 11359-1/2 | 23 to 55°C | ||||
9e-05 1/K Show Supplier Material materials with Coefficient of thermal expansion of 9e-05 1/K | ISO 11359-1/2 | 23 to 55°C, Transverse | |||||
Glow Wire Flammability Index | 700 °C Show Supplier Material materials with Glow Wire Flammability Index of 700 °C | IEC 60695-2-12 | 2.0 mm | ||||
Heat deflection temperature | 99 °C Show Supplier Material materials with Heat deflection temperature of 99 °C | ISO 75-1/2 | 1.8 MPa | ||||
108 °C Show Supplier Material materials with Heat deflection temperature of 108 °C | ISO 75-1/2 | 0.45 MPa | |||||
Vicat softening temperature | 106 °C Show Supplier Material materials with Vicat softening temperature of 106 °C | ISO 306 | 50 N | 50°C/h | ||||
Flammability | At thickness 1.6 mm UL 94: HB. Burning rate US-FMVSS (2.0 mm): 34 mm/min | max. | according to ISO 3795 | ||||||
Electrical
| Property | Value | Frequency | Testing Standard |
|---|---|---|---|
Dielectric constant | 3 [-] Show Supplier Material materials with Dielectric constant of 3 [-] | 100Hz | IEC 60250 |
3 [-] Show Supplier Material materials with Dielectric constant of 3 [-] | 1MHz | IEC 60250 | |
Dissipation factor | 0.0038 [-] Show Supplier Material materials with Dissipation factor of 0.0038 [-] | 100Hz | IEC 60250 |
0.0086 [-] Show Supplier Material materials with Dissipation factor of 0.0086 [-] | 1MHz | IEC 60250 | |
Surface resistivity | 2e+17 Ω/sq Show Supplier Material materials with Surface resistivity of 2e+17 Ω/sq | ||
Volume resistivity | 6e+16 Ω·cm Show Supplier Material materials with Volume resistivity of 6e+16 Ω·cm | IEC 60093 |
Rheological Properties
| Property | Value | Testing Standard | Comment |
|---|---|---|---|
Melt volume-flow rate | 14 cm³/10min Show Supplier Material materials with Melt volume-flow rate of 14 cm³/10min | ISO 1133 | 260°C/5Kg |
Shrinkage | 0.6 - 0.8 % Show Supplier Material materials with Shrinkage of 0.6 - 0.8 % | ISO 2577 | 150x105x3 |
0.6 - 0.8 % Show Supplier Material materials with Shrinkage of 0.6 - 0.8 % | ISO 2577 | 150x105x3, Transverse |
Technological properties
| Property | ||
|---|---|---|
| Certifications | UL Certificate | |
| Handling recommendations | Please see the Material Safety Data Sheet for relevant health & safety information. | |
| Other | Control measurements in other places may issue different results due to influences of machinery, equipment, test method or storage conditions. | |
| Processing methods | Injection molding-melt temperature: 240 ºC according to ISO 294 Injection molding-mold temperature: 70 ºC according to ISO 294 Injection molding-injection velocity: 240 mm/s according to ISO 294 | |