Zytel® HTN51G35HSLR BK420J

Want to keep this datasheet? Save it now in your required format

Description

Zytel® HTN51G35HSLR BK420J is a 35% glass reinforced, heat stabilized, lubricated, hydrolysis resistant high performance polyamide resin with improved surface appearance. It is also a PPA resin.

Equivalent Materials

This material data has been provided by Matmatch.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.46 g/cm³

Show Material materials with Density of 1.46 g/cm³

ISO 1183

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

11.5 GPa

Show Material materials with Elastic modulus of 11.5 GPa

ISO 527-1/-2

Elongation

23.0 °C

2.6 %

Show Material materials with Elongation of 2.6 %

ISO 527-1/-2

Flexural modulus

23.0 °C

10.3 GPa

Show Material materials with Flexural modulus of 10.3 GPa

ISO 178

Impact strength, Charpy notched

23.0 °C

11 kJ/m²

Show Material materials with Impact strength, Charpy notched of 11 kJ/m²

ISO 179/1eA

Poisson's ratio

23.0 °C

0.33 [-]

Show Material materials with Poisson's ratio of 0.33 [-]

Tensile strength

23.0 °C

215 MPa

Show Material materials with Tensile strength of 215 MPa

ISO 527-1/-2

Thermal

PropertyValueComment

Glass transition temperature

135 °C

Show Material materials with Glass transition temperature of 135 °C

ISO 11357-1/-2 | 18°F/min

Heat deflection temperature, 1.80 MPa

264 °C

Show Material materials with Heat deflection temperature, 1.80 MPa of 264 °C

ISO 75-1/-2

Flammability

FMVSS Class: B -, Burning rate, Thickness 1 mm: 23 mm/min

Rheological Properties

PropertyTemperatureValueComment

Shrinkage

23.0 °C

0.2 %

Show Material materials with Shrinkage of 0.2 %

ISO 294-4, 2577

Shrinkage, transverse

23.0 °C

0.5 %

Show Material materials with Shrinkage, transverse of 0.5 %

ISO 294-4, 2577

Technological properties

Property
Fillers

35% Glass Fiber

Processing methods

Drying Recommended: yes, Drying Temperature: 100°C, Drying Time, Dehumidified Dryer: 6-8h, Processing Moisture Content: ≤0.1%, Melt Temperature Optimum: 325°C, Min. melt temperature: 320°C, Max. melt temperature: 330°C, Mold Temperature Optimum: 150°C, Min. mold temperature: 140°C, Max. mold temperature: 180°C