Melamine-phenol-formaldehyde Reinforced with 35% Cellulose Powder and 10% Mineral Powder (MP+LD35+MD10), Type 181.5

Alternative and trade names
Melopas®
Want to keep this datasheet? Save it now in your required format

Description

Phenol-modified melamine with excellent surface hardness, good mechanical properties, good electrical properties and good heat resistance

Ashby charts

See where Melamine-phenol-formaldehyde Reinforced with 35% Cellulose Powder and 10% Mineral Powder (MP+LD35+MD10), Type 181.5 falls on the material property chart for Density against Elastic modulus in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

Density

ρ

1.5 - 1.7 g/cm³ at 20 °C

Thermal

Coefficient of thermal expansion

α

2.5E-5 - 4E-5 1/K at 20 °C

Flammability

UL 94 V0

Max service temperature, long

Tmaxlong

135 °C

Max service temperature, short

160 °C

Thermal conductivity

λ

0.3 - 0.45 W/(m·K) at 20 °C

Electrical

Dielectric constant

εr

8 - 13.5 [-] at 20 °C

Electrical resistivity

ρel

1.00E+10 - 1.00E+11 Ω·m at 20 °C

Optical

Transparency

no

Technological properties

Application areas

Contact strips, contact clamps, switchgears

Filler Type

Fillers

35% Cellulose Powder and 10% Mineral Powder

Processing methods

Injection molding, compression molding

This material data has been provided by M-Base.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.