General
Property | Value |
---|---|
Density | 1.45 - 1.65 g/cm³ Show Material materials with Density of 1.45 - 1.65 g/cm³ |
Mechanical
Property | Value |
---|---|
Elastic modulus | 6.5 - 9.0 GPa Show Material materials with Elastic modulus of 6.5 - 9.0 GPa |
Impact strength, Charpy notched | 1.3 - 1.65 kJ/m² Show Material materials with Impact strength, Charpy notched of 1.3 - 1.65 kJ/m² |
Impact strength, Charpy unnotched | 3.5 kJ/m² Show Material materials with Impact strength, Charpy unnotched of 3.5 kJ/m² |
10 kJ/m² Show Material materials with Impact strength, Charpy unnotched of 10 kJ/m² | |
Tensile strength | 55.0 - 75.0 MPa Show Material materials with Tensile strength of 55.0 - 75.0 MPa |
Thermal
Property | Value |
---|---|
Coefficient of thermal expansion | 2.5e-05 - 4e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.5e-05 - 4e-05 1/K |
Thermal conductivity | 0.3 - 0.45 W/(m·K) Show Material materials with Thermal conductivity of 0.3 - 0.45 W/(m·K) |
Flammability | UL 94 V0 |
Electrical
Property | Value |
---|---|
Dielectric constant | 8 [-] Show Material materials with Dielectric constant of 8 [-] |
13.5 [-] Show Material materials with Dielectric constant of 13.5 [-] | |
Electrical resistivity | 10000000000.0 - 100000000000.0 Ω·m Show Material materials with Electrical resistivity of 10000000000.0 - 100000000000.0 Ω·m |
Optical
Property | Value |
---|---|
Transparency | no |
Technological properties
Property | ||
---|---|---|
Application areas | Contact strips, contact clamps, screw caps | |
Fillers | 40% Wood Powder and 10% Mineral Powder | |
Processing methods | Injection molding, compression molding |