ISO 4381 Grade PbSb10Sn6

Want to keep this datasheet? Save it now in your required format

Description

Minimum hardness of the shaft: 160 HB Suitable only for pure sliding stresses at low load and mean sliding velocities in the hydrodynamic range, moderate impact stress. Good embeddability.

Related Standards

ISO 4381

Equivalent Materials

This material data has been provided by WIAM.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

All categories

Properties

General

Property	Temperature	Value	Comment
Density	23.0 °C	9.6 g/cm³ Show Material materials with Density of 9.6 g/cm³	Typical for Lead Antimony

Mechanical

Property	Temperature	Value
Hardness, Brinell	20.0 °C	16 [-] Show Material materials with Hardness, Brinell of 16 [-]
	50.0 °C	16 [-] Show Material materials with Hardness, Brinell of 16 [-]
	120.0 °C	14 [-] Show Material materials with Hardness, Brinell of 14 [-]
	150.0 °C	8 [-] Show Material materials with Hardness, Brinell of 8 [-]

Yield strength Rp0.2	20.0 °C	39 MPa Show Material materials with Yield strength Rp0.2 of 39 MPa
	50.0 °C	32 MPa Show Material materials with Yield strength Rp0.2 of 32 MPa
	100.0 °C	27 MPa Show Material materials with Yield strength Rp0.2 of 27 MPa
	Unlock all property charts

Thermal

Property	Temperature	Value	Comment
Melting point		235 - 305 °C Show Material materials with Melting point of 235 - 305 °C	Typical for Lead Antimony
Specific heat capacity	23.0 °C	130 - 159 J/(kg·K) Show Material materials with Specific heat capacity of 130 - 159 J/(kg·K)	Typical for Lead Antimony
Thermal conductivity	23.0 °C	24 - 34 W/(m·K) Show Material materials with Thermal conductivity of 24 - 34 W/(m·K)	Typical for Lead Antimony

Chemical properties

Property	Value
Aluminium	0.01 % Show Material materials with Aluminium of 0.01 %
Antimony	9 - 11 % Show Material materials with Antimony of 9 - 11 %
Arsenic	0.25 % Show Material materials with Arsenic of 0.25 %
Bismuth	0.1 % Show Material materials with Bismuth of 0.1 %
Copper	0.7 % Show Material materials with Copper of 0.7 %
Iron	0.1 % Show Material materials with Iron of 0.1 %
Tin	5 - 7 % Show Material materials with Tin of 5 - 7 %
Zinc	0.01 % Show Material materials with Zinc of 0.01 %