EN 12513 Grade G-X 300 NiMo 3 Mg soft annealed (+A)

Want to keep this datasheet? Save it now in your required format

Description

G-X 300 NiMo 3 Mg, is a high-strength material with 700 to 1300 N7mm2 and 1 to 8 % strain. Has the highest impact strength of all kinds of cast irons mentioned in the DIN 1695.

Related Standards

This material data has been provided by WIAM.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValue

Density

20.0 °C

7.4 g/cm³

Show Material materials with Density of 7.4 g/cm³

Mechanical

PropertyTemperatureValueComment

Elastic modulus

20.0 °C

165 - 180 GPa

Show Material materials with Elastic modulus of 165 - 180 GPa

Hardness, Vickers

20.0 °C

300 [-]

Show Material materials with Hardness, Vickers of 300 [-]

Poisson's ratio

23.0 °C

0.27 [-]

Show Material materials with Poisson's ratio of 0.27 [-]

Typical for Cast Iron

Shear modulus

23.0 °C

41 GPa

Show Material materials with Shear modulus of 41 GPa

Typical for Cast Iron

Thermal

PropertyTemperatureValueComment

Melting point

1120 °C

Show Material materials with Melting point of 1120 °C

Typical for Cast Iron

Specific heat capacity

23.0 °C

460 - 527 J/(kg·K)

Show Material materials with Specific heat capacity of 460 - 527 J/(kg·K)

Typical for Cast Iron

Thermal conductivity

23.0 °C

55 W/(m·K)

Show Material materials with Thermal conductivity of 55 W/(m·K)

Typical for Cast Iron

Chemical properties

PropertyValue

Carbon

2.8 - 3.5 %

Show Material materials with Carbon of 2.8 - 3.5 %

Manganese

0.2 - 0.5 %

Show Material materials with Manganese of 0.2 - 0.5 %

Molybdenum

0.5 - 0.8 %

Show Material materials with Molybdenum of 0.5 - 0.8 %

Nickel

1.5 - 4.5 %

Show Material materials with Nickel of 1.5 - 4.5 %

Silicon

2 - 2.6 %

Show Material materials with Silicon of 2 - 2.6 %