EN 1562 Grade GJMB-350-10 not decarburized annealed

Want to keep this datasheet? Save it now in your required format

Description

Material EN-GJMB-350-10 (former GTS-35-10 nach DIN 1692-82) is an all-black malleable cast iron that is used for wheel hubs, shift-forks, rear-axle casings, hydraulic parts, steering cases, planetary-wheel carrier for automatic transmissions, adjusting rings, cast heads, caps, wing nuts and spindle nuts. This material is comparable to UNS 22200 from USA.

Related Standards

This material data has been provided by WIAM.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValue

Density

20.0 °C

7.2 - 7.5 g/cm³

Show Material materials with Density of 7.2 - 7.5 g/cm³

Mechanical

PropertyTemperatureValueComment

Elastic modulus

20.0 °C

175 - 195 GPa

Show Material materials with Elastic modulus of 175 - 195 GPa

Hardness, Brinell

20.0 °C

150 [-]

Show Material materials with Hardness, Brinell of 150 [-]

Poisson's ratio

23.0 °C

0.27 [-]

Show Material materials with Poisson's ratio of 0.27 [-]

Typical for Cast Iron

Shear modulus

23.0 °C

41 GPa

Show Material materials with Shear modulus of 41 GPa

Typical for Cast Iron

Tensile strength

20.0 °C

350 MPa

Show Material materials with Tensile strength of 350 MPa

Yield strength Rp0.2

20.0 °C

200 MPa

Show Material materials with Yield strength Rp0.2 of 200 MPa

Thermal

PropertyTemperatureValueComment

Melting point

1120 °C

Show Material materials with Melting point of 1120 °C

Typical for Cast Iron

Specific heat capacity

20.0 °C

460 - 500 J/(kg·K)

Show Material materials with Specific heat capacity of 460 - 500 J/(kg·K)

Thermal conductivity

20.0 °C

50 - 63 W/(m·K)

Show Material materials with Thermal conductivity of 50 - 63 W/(m·K)

Electrical

PropertyTemperatureValue

Electrical resistivity

20.0 °C

3E-7 - 4E-7 Ω·m

Show Material materials with Electrical resistivity of 3E-7 - 4E-7 Ω·m

Chemical properties

PropertyValue

Carbon

2.3 - 2.6 %

Show Material materials with Carbon of 2.3 - 2.6 %

Manganese

0.4 - 0.5 %

Show Material materials with Manganese of 0.4 - 0.5 %

Silicon

1.2 - 1.5 %

Show Material materials with Silicon of 1.2 - 1.5 %

Sulfur

0.1 - 0.15 %

Show Material materials with Sulfur of 0.1 - 0.15 %