JIS H4630 Class 3 Hot-Extruded

Want to keep this datasheet? Save it now in your required format


JIS Class 3 titanium is the third of four commercially unalloyed titanium grades. It is known for its high strength and good corrosion resistance. It also has good impact properties at low temperature and is suitable for being welded, machined, cold worked and cast.

Related Standards

Equivalent Materials

This material data has been provided by Japanese Industrial Standards.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.





4.506 g/cm³

Show Material materials with Density of 4.506 g/cm³

Typical for Pure Titanium


PropertyValueConditionRelated StandardsShapeComment

Elastic modulus

120.0 GPa

Show Material materials with Elastic modulus of 120.0 GPa

Typical for Pure Titanium


18.0 %

Show Material materials with Elongation of 18.0 %


JIS H4630

Tube, Pipe

Poisson's ratio

0.361 [-]

Show Material materials with Poisson's ratio of 0.361 [-]

Typical for Pure Titanium

Shear modulus

46.0 GPa

Show Material materials with Shear modulus of 46.0 GPa

Typical for Pure Titanium

Tensile strength

481.0 MPa

Show Material materials with Tensile strength of 481.0 MPa


JIS H4630

Tube, Pipe



Coefficient of thermal expansion

8.400000000000001e-06 - 8.599999999999999e-06 1/K

Show Material materials with Coefficient of thermal expansion of 8.400000000000001e-06 - 8.599999999999999e-06 1/K

Typical for Pure Titanium

Melting point

1670.0 °C

Show Material materials with Melting point of 1670.0 °C

Typical for Pure Titanium

Specific heat capacity

513.0 - 599.0 J/(kg·K)

Show Material materials with Specific heat capacity of 513.0 - 599.0 J/(kg·K)

Typical for Pure Titanium

Thermal conductivity

15.0 - 22.0 W/(m·K)

Show Material materials with Thermal conductivity of 15.0 - 22.0 W/(m·K)

Typical for Pure Titanium

Technological properties

Processing history

hot extruded