Palladium (Pd) Half-Hard

Want to keep this datasheet? Save it now in your required format

This material data has been provided by

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.





11 g/cm³

Show Material materials with Density of 11 g/cm³ at 23.0 °C

23.0 °C



Elastic modulus

110 GPa

Show Material materials with Elastic modulus of 110 GPa at 23.0 °C

23.0 °C


1.2 %

Show Material materials with Elongation of 1.2 % at 23.0 °C

23.0 °C

Poisson's ratio

0.39 [-]

Show Material materials with Poisson's ratio of 0.39 [-] at 23.0 °C

23.0 °C

Typical for Palladium

Shear modulus

42 GPa

Show Material materials with Shear modulus of 42 GPa at 23.0 °C

23.0 °C

Typical for Palladium

Tensile strength

360 MPa

Show Material materials with Tensile strength of 360 MPa at 23.0 °C

23.0 °C



Coefficient of thermal expansion

1.2E-5 1/K

Show Material materials with Coefficient of thermal expansion of 1.2E-5 1/K at 23.0 °C

23.0 °C

Melting point

1550 °C

Show Material materials with Melting point of 1550 °C

Specific heat capacity

240 J/(kg·K)

Show Material materials with Specific heat capacity of 240 J/(kg·K) at 23.0 °C

23.0 °C

Thermal conductivity

60 - 76 W/(m·K)

Show Material materials with Thermal conductivity of 60 - 76 W/(m·K) at 23.0 °C

23.0 °C

Typical for Palladium

Chemical properties



0 - 0.2 %


99.8 - 100 %