Polyamide 6 (PA6) A3000G15BK

Alternative and trade names
PA6-GF15
Want to keep this datasheet? Save it now in your required format

Description

Glass Fiber Reinforced Grade, 15% glass fiber reinforced

Low viscosity, can be used for the molding of finish molds

This material data has been provided by RebornPlas Composites Co., Ltd.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.25 g/cm³

Show Supplier Material materials with Density of 1.25 g/cm³

ASTM D792

Water absorption, equilibrium

23.0 °C

0.3 %

Show Supplier Material materials with Water absorption, equilibrium of 0.3 %

max., ASTM D4442

Mechanical

PropertyTemperatureValueComment

Elongation

23.0 °C

5 %

Show Supplier Material materials with Elongation of 5 %

max., ASTM D638

Flexural modulus

23.0 °C

4 GPa

Show Supplier Material materials with Flexural modulus of 4 GPa

ASTM D790

Flexural strength

23.0 °C

150 MPa

Show Supplier Material materials with Flexural strength of 150 MPa

ASTM D790

Hardness, Rockwell R

23.0 °C

115 [-]

Show Supplier Material materials with Hardness, Rockwell R of 115 [-]

ASTM D785

Impact strength, Izod notched, ASTM

23.0 °C

50 J/m

Show Supplier Material materials with Impact strength, Izod notched, ASTM of 50 J/m

ASTM D256

Tensile strength

23.0 °C

80 MPa

Show Supplier Material materials with Tensile strength of 80 MPa

ASTM D638

Thermal

PropertyTemperatureValueComment

Ash content

23.0 °C

15 %

Show Supplier Material materials with Ash content of 15 %

ASTM D482

Heat deflection temperature, 1.80 MPa

180 °C

Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 180 °C

ASTM D648

Rheological Properties

PropertyTemperatureValueComment

Shrinkage

23.0 °C

0.3 - 0.7 %

Show Supplier Material materials with Shrinkage of 0.3 - 0.7 %

ASTM D955

Technological properties

Property
Application areas

Sports Equipment, Hand tool, Bicycle brake parts, Home appliance parts, Motor housing, Hairdryer nozzle, Electrical and Pneumatic Hand Tools-Hot melt glue gun housing, Industrial Parts & Components-Light bulb holder

Color

Black

Fillers

15% Glass Fiber