17-4 PH H1075 Bar

Alternative and trade names
17-4 PH, Alloy 1.4542, 17-4 PH
Want to keep this datasheet? Save it now in your required format

Description

17-4 PH is a martensitic precipitation hardening stainless steel with additions of copper (Cu), niobium (Nb) and tantalum (Ta). The grade combines high strength and hardness values with moderate corrosion resistance. Different heat treatment temperatures can optimize mechanical properties, e.g. yield strength at 1100 – 1300MPa. Our stock material is double aged at 1150°F – defined as DH1150. Age hardening is can also be performed at 480°C to 620°C in a one-step process, where the lowest temperature gives the highest strength. To achieve good toughness at low temperatures, precipitation-hardening temperatures below 550°C are not recommended.

Related Standards

Equivalent Materials

This material data has been provided by Sverdrup Steel.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

Properties

Dimension

PropertyValue

Diameter

25.4 - 355.6 mm

Show Supplier Material materials with Diameter of 25.4 - 355.6 mm

Mechanical

PropertyTemperatureValue

Charpy impact energy, V-notch

-46.0 °C

27 J

Show Supplier Material materials with Charpy impact energy, V-notch of 27 J

Elongation

23.0 °C

10 %

Show Supplier Material materials with Elongation of 10 %

Hardness, Brinell

23.0 °C

311 [-]

Show Supplier Material materials with Hardness, Brinell of 311 [-]

Tensile strength

23.0 °C

1000 MPa

Show Supplier Material materials with Tensile strength of 1000 MPa

Yield strength Rp0.2

23.0 °C

860 MPa

Show Supplier Material materials with Yield strength Rp0.2 of 860 MPa

Chemical properties

PropertyValueComment

Carbon

0.07 %

Show Supplier Material materials with Carbon of 0.07 %

Chromium

15 - 17.5 %

Show Supplier Material materials with Chromium of 15 - 17.5 %

Copper

3 - 5 %

Show Supplier Material materials with Copper of 3 - 5 %

Iron

Balance

Manganese

1 %

Show Supplier Material materials with Manganese of 1 %

Nickel

3 - 5 %

Show Supplier Material materials with Nickel of 3 - 5 %

Other

0.15 - 0.45 %

Show Supplier Material materials with Other of 0.15 - 0.45 %

Nb+Ta

Phosphorus

0.04 %

Show Supplier Material materials with Phosphorus of 0.04 %

Silicon

1 %

Show Supplier Material materials with Silicon of 1 %

Sulfur

0.03 %

Show Supplier Material materials with Sulfur of 0.03 %

Technological properties

Property
Application areas

chemical, petrochemical, paper and general metalworking industries

Heat Treatment

Solution annealing at 1000 to 1050°C, hardened at 480°C (H900) to 621°C (H1150)

Welding

Good, Pre-heating and post-heating practices used for standard hardenable stainless grades are not required. Min. RREN: 17