This website uses cookies to improve service quality. You will find more information about cookies on the privacy policy page.

17-4 PH H1150 Bar

Alternative and trade names
EN 1.4542, UNS S17400, AISI 630
.XLSX
.PDF
Save

Description

17-4 PH is a martensitic precipitation hardening stainless steel with additions of copper (Cu), niobium (Nb) and tantalum (Ta). The grade combines high strength and hardness values with moderate corrosion resistance. Different heat treatment temperatures can optimize mechanical properties, e.g. yield strength at 1100 – 1300MPa. Our stock material is double aged at 1150F – defined as DH1150. Age hardening is can also be performed at 480°C to 620°C in a one-step process, where the lowest temperature gives the highest strength. To achieve good toughness at low temperatures, precipitation-hardening temperatures below 550°C are not recommended.

Related Standards

Properties

Dimension

Diameter d

25.4 - 355.6 mm

Mechanical

Elongation A

16 % at 20 °C

Hardness, Brinell HB

277 [-] at 20 °C

Impact strength, Charpy notched Ivnot

41 kJ/m² at -46 °C

Tensile strength Rm

930 MPa at 20 °C

Yield strength Rp0.2 Rp0.2

725 MPa at 20 °C

Chemical properties

Element

Weight %

Comment

Cr

15 - 17.5 %

Cu

3 - 5 %

Ni

3 - 5 %

Mn

1 %

Si

1 %

More

Technological properties

Application areas

chemical, petrochemical, paper and general metalworking industries

Processing history

Solution annealing at 1000 to 1050°C, hardened at 480°C (H900) to 621°C (H1150)

Welding

Good, Pre-heating and post-heating practices used for standard hardenable stainless grades are not required.

This material data has been provided by Sverdrup Steel.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.