Properties
Dimension
| Property | Value |
|---|---|
Diameter | 28.1 - 82.55 mm Show Supplier Material materials with Diameter of 28.1 - 82.55 mm |
Mechanical
| Property | Temperature | Value |
|---|---|---|
Elongation | 23.0 °C | 17 % Show Supplier Material materials with Elongation of 17 % |
Hardness, Brinell | 23.0 °C | 250 [-] Show Supplier Material materials with Hardness, Brinell of 250 [-] |
Tensile strength | 23.0 °C | 900 MPa Show Supplier Material materials with Tensile strength of 900 MPa |
Yield strength Rp0.2 | 23.0 °C | 620 MPa Show Supplier Material materials with Yield strength Rp0.2 of 620 MPa |
Chemical properties
| Property | Value | Comment | |
|---|---|---|---|
Aluminium | 2.3 - 3.15 % Show Supplier Material materials with Aluminium of 2.3 - 3.15 % | ||
Carbon | 0.25 % Show Supplier Material materials with Carbon of 0.25 % | ||
Copper | 27 - 33 % Show Supplier Material materials with Copper of 27 - 33 % | ||
Iron | 2 % Show Supplier Material materials with Iron of 2 % | ||
Manganese | 1.5 % Show Supplier Material materials with Manganese of 1.5 % | ||
Nickel | Balance | ||
Other | 63 % Show Supplier Material materials with Other of 63 % | Ni+Co | |
Phosphorus | 0.03 % Show Supplier Material materials with Phosphorus of 0.03 % | ||
Silicon | 0.5 % Show Supplier Material materials with Silicon of 0.5 % | ||
Sulfur | 0.01 % Show Supplier Material materials with Sulfur of 0.01 % | ||
Titanium | 0.35 - 0.85 % Show Supplier Material materials with Titanium of 0.35 - 0.85 % | ||
Technological properties
| Property | ||
|---|---|---|
| Application areas | Typical area of usage is pump shafts and oil well tools. | |
| Heat Treatment | Solution annealing: 980 – 1040°C. Age hardened: 540 – 600°C. | |
| Welding | Very good | |