High Density Polyethylene (HD PE) for Extrusion



Recycled high density polyethylene granulate for extrusion. In addition to the standard reclaimed polymer portfolio, WELA Plast offers individually optimized customer specific formulations, especially when it comes to customized product colors and property profiles.



Ash content cash

0.03 - 3 % at 625 °C

DIN EN ISO 3451-1:1997

Density ρ

0.94 - 0.97 g/cm³ at 20 °C

DIN EN ISO 1183-1

Melt mass-flow rate MFR

0.02 - 0.5 g/10min at 190 °C

DIN EN ISO 1133-1 (190°C/2.16kg)


Impact strength, Charpy notched Ivnot

33.4 - 39.5 kJ/m² at 20 °C

Eq. DIN 179-1

Technological properties


Natural, white, black, blue, yellow, jazz

Processing methods

Sheet extrusion, blow molding

This material data has been provided by Wela Plast.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.