DIN 1725-1 Grade 3.0526 H1x

Want to keep this datasheet? Save it now in your required format

Description

The alloy AlMn1Mg1 has similar properties like AlMn1, however it reaches higher strength (to F 26). It has also relatively high strength in the soft condition, but it is well cold fomrable. The alloy belongs to the nature-hard aluminum materials. A strength increase can be achieved, not by a purposeful heat treatment only by cold forming. It is very well warm and cold transformable and is suitable to the deep-drawing (no lappet formation). The alloy is very corrosion and sea water-steadily. The main field of application, the packing, determines the kind of semi-finished material standardized according to DIN 1788 and DIN 1745 (sheet metal and strip). Application: In the packing (DIN 59606) for cans (dose lower parts, abgestreckte doses), breaking covers and catches of all kinds. In the building industry for roofings (usually profile boards), claddings as well as for roll shutter and roll gates.

Related Standards

Equivalent Materials

This material data has been provided by WIAM.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Do you supply similar materials?

List your company on Matmatch now and reach engineers around the world looking for such materials.

Request more information

Properties

General

Property	Temperature	Value	Condition	Related Standards	Shape
Density	20.0 °C	2.72 g/cm³ Show Material materials with Density of 2.72 g/cm³	H1x	DIN 1725-1, EN 573-3, EN 573-4	Flat

Mechanical

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Elastic modulus	20.0 °C	65.0 - 71.0 GPa Show Material materials with Elastic modulus of 65.0 - 71.0 GPa	H1x	DIN 1725-1, EN 573-3, EN 573-4	Flat
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m				Typical for Wrought 3000 Series Aluminium
Poisson's ratio		0.33 [-] Show Material materials with Poisson's ratio of 0.33 [-]				Typical for Wrought 3000 Series Aluminium
Shear modulus	20.0 °C	25.0 - 27.0 GPa Show Material materials with Shear modulus of 25.0 - 27.0 GPa	H1x	DIN 1725-1, EN 573-3, EN 573-4	Flat
Tensile strength	20.0 °C	270.0 - 310.0 MPa Show Material materials with Tensile strength of 270.0 - 310.0 MPa	H1x	DIN 1725-1, EN 573-3, EN 573-4	Flat

Thermal

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Coefficient of thermal expansion	-50.0 °C	2.15e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.15e-05 1/K	H1x	DIN 1725-1, EN 573-3, EN 573-4	Flat
	100.0 °C	2.32e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.32e-05 1/K	H1x	DIN 1725-1, EN 573-3, EN 573-4	Flat
	200.0 °C	2.41e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.41e-05 1/K	H1x	DIN 1725-1, EN 573-3, EN 573-4	Flat
	300.0 °C	2.51e-05 1/K Show Material materials with Coefficient of thermal expansion of 2.51e-05 1/K	H1x	DIN 1725-1, EN 573-3, EN 573-4	Flat
Melting point		629.0 - 654.0 °C Show Material materials with Melting point of 629.0 - 654.0 °C				Typical for Wrought 3000 Series Aluminium
Specific heat capacity	20.0 °C	893.0 J/(kg·K) Show Material materials with Specific heat capacity of 893.0 J/(kg·K)	H1x	DIN 1725-1, EN 573-3, EN 573-4	Flat
Thermal conductivity	20.0 °C	160.0 - 190.0 W/(m·K) Show Material materials with Thermal conductivity of 160.0 - 190.0 W/(m·K)	H1x	DIN 1725-1, EN 573-3, EN 573-4	Flat

Electrical

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Electrical conductivity	20.0 °C	20000000.0 - 24000000.0 S/m Show Material materials with Electrical conductivity of 20000000.0 - 24000000.0 S/m	H1x	DIN 1725-1, EN 573-3, EN 573-4	Flat
Electrical resistivity		3.4e-08 - 4.2e-08 Ω·m Show Material materials with Electrical resistivity of 3.4e-08 - 4.2e-08 Ω·m				Typical for Wrought 3000 Series Aluminium

Chemical properties

Property	Value	Condition	Related Standards	Shape
Copper	0.25 Show Material materials with Copper of 0.25	H1x	DIN 1725-1, EN 573-3, EN 573-4	Flat
Iron	0.7 Show Material materials with Iron of 0.7	H1x	DIN 1725-1, EN 573-3, EN 573-4	Flat
Magnesium	0.8 - 1.3 % Show Material materials with Magnesium of 0.8 - 1.3 %	H1x	DIN 1725-1, EN 573-3, EN 573-4	Flat
Manganese	1.0 - 1.5 % Show Material materials with Manganese of 1.0 - 1.5 %	H1x	DIN 1725-1, EN 573-3, EN 573-4	Flat
Silicon	0.3 Show Material materials with Silicon of 0.3	H1x	DIN 1725-1, EN 573-3, EN 573-4	Flat
Zinc	0.25 Show Material materials with Zinc of 0.25	H1x	DIN 1725-1, EN 573-3, EN 573-4	Flat

Technological properties

Property

Workability

Good workability.