PtRh20 soft annealed (+A)

View suppliers (2)
Want to keep this datasheet? Save it now in your required format

Description

The material PtRh20 (in the literature also Pt20Rh, Pt80Rh20 or PtRh80/20) is used for highly stressed laboratory equipment, catalysts, electrodes, glass fiber nozzles and lining materials, for crucibles, casings and stirrers in viscometry as well as for glass melting tanks. The mechanical, thermal and corrosive resistance increases with increasing rhodium content. An advantage of the platinum-rhodium alloy is that even in an oxidizing atmosphere only a minimum of weight loss occurs. The material is ductile, corrosion-resistant, oxidation-resistant and high temperature resistant. It is machinable, roll-cladable and conditionally deductible from the gas phase.

Related Standards

This material data has been provided by WIAM.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValue

Density

20.0 °C

18.7 g/cm³

Show Material materials with Density of 18.7 g/cm³

Mechanical

PropertyTemperatureValueComment

Elastic modulus

20.0 °C

240 GPa

Show Material materials with Elastic modulus of 240 GPa

Elongation

20.0 °C

32 %

Show Material materials with Elongation of 32 %

Hardness, Vickers

20.0 °C

113 [-]

Show Material materials with Hardness, Vickers of 113 [-]

Poisson's ratio

23.0 °C

0.39 [-]

Show Material materials with Poisson's ratio of 0.39 [-]

Typical for Platinum

Shear modulus

20.0 °C

86 GPa

Show Material materials with Shear modulus of 86 GPa

Tensile strength

20.0 °C

380 MPa

Show Material materials with Tensile strength of 380 MPa

Yield strength

20.0 °C

110 MPa

Show Material materials with Yield strength of 110 MPa

Yield strength Rp0.2

20.0 °C

110 MPa

Show Material materials with Yield strength Rp0.2 of 110 MPa

Thermal

PropertyTemperatureValueComment

Coefficient of thermal expansion

300.0 °C

1.04E-5 1/K

Show Material materials with Coefficient of thermal expansion of 1.04E-5 1/K

700.0 °C

1.09E-5 1/K

Show Material materials with Coefficient of thermal expansion of 1.09E-5 1/K

1200.0 °C

1.15E-5 1/K

Show Material materials with Coefficient of thermal expansion of 1.15E-5 1/K

Melting point

1769 °C

Show Material materials with Melting point of 1769 °C

Typical for Platinum

Specific heat capacity

23.0 °C

136 J/(kg·K)

Show Material materials with Specific heat capacity of 136 J/(kg·K)

Typical for Platinum

Thermal conductivity

20.0 °C

28 W/(m·K)

Show Material materials with Thermal conductivity of 28 W/(m·K)

Electrical

PropertyTemperatureValue

Electrical resistivity

20.0 °C

2.08E-7 Ω·m

Show Material materials with Electrical resistivity of 2.08E-7 Ω·m

Chemical properties

PropertyValue

Platinum

80 %

Show Material materials with Platinum of 80 %

Rhodium

20 %

Show Material materials with Rhodium of 20 %