AMPCO® M4 Forged plates

Want to keep this datasheet? Save it now in your required format

Description

The patented process gives AMPCO® M4 mechanical properties beyond the range of commercial nickel-aluminium bronzes, comparable to beryllium copper at a lower cost and without the beryllium copper industrial hygiene requirements.

Diese Materialdaten wurden von AMPCO METAL zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Eigenschaften

Allgemein

PropertyTemperatureValue

Dichte

23.0 °C

7.45 g/cm³

Show Supplier Material materials with Dichte of 7.45 g/cm³

Recycled Content

80 %

Show Supplier Material materials with Recycled Content of 80 %

Mechanisch

PropertyTemperatureValueComment

Dauerfestigkeit

23.0 °C

240 - 250 MPa

Show Supplier Material materials with Dauerfestigkeit of 240 - 250 MPa

100.000.000 cycles

Dehnung A5

23.0 °C

3 - 4 %

Show Supplier Material materials with Dehnung A5 of 3 - 4 %

Druckfestigkeit

23.0 °C

1100 - 1200 MPa

Show Supplier Material materials with Druckfestigkeit of 1100 - 1200 MPa

Druckfestigkeit, 0,1%

23.0 °C

680 - 720 MPa

Show Supplier Material materials with Druckfestigkeit, 0,1% of 680 - 720 MPa

Elastizitätsmodul

23.0 °C

110 - 120 GPa

Show Supplier Material materials with Elastizitätsmodul of 110 - 120 GPa

Flächenreduzierung

23.0 °C

3 - 4 %

Show Supplier Material materials with Flächenreduzierung of 3 - 4 %

Härte, HBW

23.0 °C

250 - 260 [-]

Show Supplier Material materials with Härte, HBW of 250 - 260 [-]

HBW 10/3000

Härte, Rockwell C

23.0 °C

25 - 26 [-]

Show Supplier Material materials with Härte, Rockwell C of 25 - 26 [-]

Kerbschlagenergie

23.0 °C

4 - 5 J

Show Supplier Material materials with Kerbschlagenergie of 4 - 5 J

Scherfestigkeit

23.0 °C

520 - 530 MPa

Show Supplier Material materials with Scherfestigkeit of 520 - 530 MPa

Streckgrenze Rp0,5

23.0 °C

420 - 460 MPa

Show Supplier Material materials with Streckgrenze Rp0,5 of 420 - 460 MPa

Zugfestigkeit

23.0 °C

750 - 780 MPa

Show Supplier Material materials with Zugfestigkeit of 750 - 780 MPa

Thermisch

PropertyTemperatureValue

Koeffizient der thermischen Ausdehnung

23.0 °C

1.6E-5 1/K

Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.6E-5 1/K

Spezifische Wärmekapazität

23.0 °C

450 J/(kg·K)

Show Supplier Material materials with Spezifische Wärmekapazität of 450 J/(kg·K)

Wärmeleitfähigkeit

23.0 °C

42 W/(m·K)

Show Supplier Material materials with Wärmeleitfähigkeit of 42 W/(m·K)

Elektrisch

PropertyTemperatureValue

Elektrische Leitfähigkeit

23.0 °C

4.80E+6 S/m

Show Supplier Material materials with Elektrische Leitfähigkeit of 4.80E+6 S/m

Specific Electrical conductivity

8.2 % IACS

Show Supplier Material materials with Specific Electrical conductivity of 8.2 % IACS

Chemical properties

PropertyValue

Kupfer

Balance

Technological properties

Property
Application areas

AMPCO® M4 was initially developed as an aircraft specification alloy for gears in retractable landing assemblies, engine spacer bearings and other similar applications. It is rapidly growing in use where higher mechanical properties at elevated temperatures together with corrosion-resistant properties are required. Typical applications include aircraft landing gear bearings and bushings, bending dies (shoes and mandrels) for the tube bending industry, gear wheels and wear/guide plates, cores and cavities in plastic injection molds and so on...