EN 10216-5 Grade X1NiCrMoCuN25-20-7 solution annealed (+AT)

Want to keep this datasheet? Save it now in your required format

Description

Steel X1NiCrMoCuN25-20-7 (acc. to VdT_V-material specification 502 : 2001-06: X 1 NiCrMoCuN 25 20 6 ), material number 1.4529, is used acc. to VdT_V-Wbl 502 : 2001-06 for pressure vessels as per TRB 100 and AD-data sheet W 2 from -10 (and AD-data sheet W 10 for the form of manufacture sheet and Krupp-VDM-sectional and bar steel/forged parts from -196 deg.) to 400 deg. as well as in nuclear power engineering as far as nuclear rules or object-related specifications permit application for pressure vessels. The weldability is given for the metal-arc welding and gas-shielded welding. Preheating is not necessary. The intermediate layer temperature should not exceed 120 deg. Heat treatment (solution annealing and quenching) after the welding only in special cases necessary (special corrosion stress). As filler materials following metals are recommended: e.g. 2.4621 (EL-NiCr21Mo9Nb), 2.4831 (SG-NiCr21Mo9Nb), 2.4607 (SG-NiCr23Mo16 and 2.4611 (SG-NiMo16Cr16Ti). The two last-mentioned should preferred because of their corrosion properties. The material is cold and hot formable. To the material acc. to DIN EN 10216-5 : 2004-11 applies: X1NiCrMoCuN25-20-7 is the stronger Mo-alloyed variant of 1.4539. The steel shows a very high resistance to crevice corrosion, pitting corrosion as well as to stress corrosion caused by pitting corrosion. It has the highest steel pitting index. The material is resistant to intercrystalline corrosion, also in welded condition. Application in higher chloride contaminated media, such as in sulphuric and phosphoric acid as well as in offshore facilities. The steel is cold and warm formable. After cold forming at deformation degrees > 15 % as well as after warm forming has to be carried out a heat treatment (solution annealing at 1100 to 1180, quenching in water).

Related Standards

EN 10216-5

Equivalent Materials

Diese Materialdaten wurden von WIAM zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Temperature	Value
Dichte	20.0 °C	7.76 - 8.1 g/cm³ Show Material materials with Dichte of 7.76 - 8.1 g/cm³

Mechanisch

Property	Temperature	Value	Comment
Dehnung	20.0 °C	35 % Show Material materials with Dehnung of 35 %
Dehnung, transversal	20.0 °C	30 % Show Material materials with Dehnung, transversal of 30 %
Elastizitätsmodul	-100.0 °C	206 GPa Show Material materials with Elastizitätsmodul of 206 GPa
	20.0 °C	195 - 196 GPa Show Material materials with Elastizitätsmodul of 195 - 196 GPa
	100.0 °C	190 GPa Show Material materials with Elastizitätsmodul of 190 GPa
	200.0 °C	182 GPa Show Material materials with Elastizitätsmodul of 182 GPa
	300.0 °C	174 GPa Show Material materials with Elastizitätsmodul of 174 GPa
	400.0 °C	166 GPa Show Material materials with Elastizitätsmodul of 166 GPa
	500.0 °C	158 GPa Show Material materials with Elastizitätsmodul of 158 GPa
	600.0 °C	150 GPa Show Material materials with Elastizitätsmodul of 150 GPa
	700.0 °C	142 GPa Show Material materials with Elastizitätsmodul of 142 GPa
	800.0 °C	134 GPa Show Material materials with Elastizitätsmodul of 134 GPa
	900.0 °C	127 GPa Show Material materials with Elastizitätsmodul of 127 GPa
	1000.0 °C	120 GPa Show Material materials with Elastizitätsmodul of 120 GPa

Poissonzahl	23.0 °C	0.3 [-] Show Material materials with Poissonzahl of 0.3 [-]	Typical for Austenitic Stainless Steel
Schubmodule	23.0 °C	77 GPa Show Material materials with Schubmodule of 77 GPa	Typical for Austenitic Stainless Steel
Streckgrenze Rp 0,2	20.0 °C	270 MPa Show Material materials with Streckgrenze Rp 0,2 of 270 MPa
	50.0 °C	254 MPa Show Material materials with Streckgrenze Rp 0,2 of 254 MPa
	100.0 °C	230 MPa Show Material materials with Streckgrenze Rp 0,2 of 230 MPa
	150.0 °C	210 MPa Show Material materials with Streckgrenze Rp 0,2 of 210 MPa
	200.0 °C	190 MPa Show Material materials with Streckgrenze Rp 0,2 of 190 MPa
	250.0 °C	180 MPa Show Material materials with Streckgrenze Rp 0,2 of 180 MPa
	300.0 °C	170 MPa Show Material materials with Streckgrenze Rp 0,2 of 170 MPa
	350.0 °C	165 MPa Show Material materials with Streckgrenze Rp 0,2 of 165 MPa
	400.0 °C	160 MPa Show Material materials with Streckgrenze Rp 0,2 of 160 MPa
	Unlock all property charts
Streckgrenze Rp 0,2, transversal	20.0 °C	270 MPa Show Material materials with Streckgrenze Rp 0,2, transversal of 270 MPa
Streckgrenze Rp 1,0	20.0 °C	310 MPa Show Material materials with Streckgrenze Rp 1,0 of 310 MPa
	50.0 °C	296 MPa Show Material materials with Streckgrenze Rp 1,0 of 296 MPa
	100.0 °C	270 MPa Show Material materials with Streckgrenze Rp 1,0 of 270 MPa
	150.0 °C	245 MPa Show Material materials with Streckgrenze Rp 1,0 of 245 MPa
	200.0 °C	225 MPa Show Material materials with Streckgrenze Rp 1,0 of 225 MPa
	250.0 °C	215 MPa Show Material materials with Streckgrenze Rp 1,0 of 215 MPa
	300.0 °C	205 MPa Show Material materials with Streckgrenze Rp 1,0 of 205 MPa
	350.0 °C	195 MPa Show Material materials with Streckgrenze Rp 1,0 of 195 MPa
	400.0 °C	190 MPa Show Material materials with Streckgrenze Rp 1,0 of 190 MPa
	Unlock all property charts
Streckgrenze Rp 1,0, transversal	20.0 °C	310 MPa Show Material materials with Streckgrenze Rp 1,0, transversal of 310 MPa
Zugfestigkeit	20.0 °C	600 - 800 MPa Show Material materials with Zugfestigkeit of 600 - 800 MPa
Zugfestigkeit, transversal	20.0 °C	600 - 800 MPa Show Material materials with Zugfestigkeit, transversal of 600 - 800 MPa

Thermisch

Property	Temperature	Value	Comment
Koeffizient der thermischen Ausdehnung	-100.0 °C	1.49E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.49E-5 1/K
	20.0 °C	1.61E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.61E-5 1/K
	100.0 °C	1.58E-5 - 1.67E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.58E-5 - 1.67E-5 1/K
	200.0 °C	1.61E-5 - 1.72E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.61E-5 - 1.72E-5 1/K
	300.0 °C	1.65E-5 - 1.77E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.65E-5 - 1.77E-5 1/K
	400.0 °C	1.69E-5 - 1.81E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.69E-5 - 1.81E-5 1/K
	500.0 °C	1.73E-5 - 1.84E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.73E-5 - 1.84E-5 1/K
	600.0 °C	1.88E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.88E-5 1/K
	700.0 °C	1.91E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.91E-5 1/K
	800.0 °C	1.94E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.94E-5 1/K
	900.0 °C	1.97E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.97E-5 1/K
	1000.0 °C	2E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2E-5 1/K
	Unlock all property charts
Schmelzpunkt		1230 - 1480 °C Show Material materials with Schmelzpunkt of 1230 - 1480 °C	Typical for Austenitic Stainless Steel
Spezifische Wärmekapazität	-100.0 °C	440 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 440 J/(kg·K)
	20.0 °C	450 - 472 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 450 - 472 J/(kg·K)
	100.0 °C	487 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 487 J/(kg·K)
	200.0 °C	503 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 503 J/(kg·K)
	300.0 °C	512 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 512 J/(kg·K)
	400.0 °C	520 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 520 J/(kg·K)
	500.0 °C	530 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 530 J/(kg·K)
	600.0 °C	541 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 541 J/(kg·K)
	700.0 °C	551 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 551 J/(kg·K)
	800.0 °C	559 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 559 J/(kg·K)
	900.0 °C	565 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 565 J/(kg·K)
	1000.0 °C	571 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 571 J/(kg·K)
	Unlock all property charts
Temperaturleitfähigkeit	20.0 °C	3.3 mm²/s Show Material materials with Temperaturleitfähigkeit of 3.3 mm²/s
	100.0 °C	3.4 mm²/s Show Material materials with Temperaturleitfähigkeit of 3.4 mm²/s
	200.0 °C	3.7 mm²/s Show Material materials with Temperaturleitfähigkeit of 3.7 mm²/s
	300.0 °C	4.1 mm²/s Show Material materials with Temperaturleitfähigkeit of 4.1 mm²/s
	400.0 °C	4.3 mm²/s Show Material materials with Temperaturleitfähigkeit of 4.3 mm²/s
	500.0 °C	4.5 mm²/s Show Material materials with Temperaturleitfähigkeit of 4.5 mm²/s
	600.0 °C	4.7 mm²/s Show Material materials with Temperaturleitfähigkeit of 4.7 mm²/s
	700.0 °C	5 mm²/s Show Material materials with Temperaturleitfähigkeit of 5 mm²/s
	800.0 °C	5.4 mm²/s Show Material materials with Temperaturleitfähigkeit of 5.4 mm²/s
	900.0 °C	5.7 mm²/s Show Material materials with Temperaturleitfähigkeit of 5.7 mm²/s
	1000.0 °C	5.8 mm²/s Show Material materials with Temperaturleitfähigkeit of 5.8 mm²/s
	Unlock all property charts
Wärmeleitfähigkeit	20.0 °C	11.9 - 12 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 11.9 - 12 W/(m·K)
	100.0 °C	13.3 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 13.3 W/(m·K)
	200.0 °C	15.1 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 15.1 W/(m·K)
	300.0 °C	16.7 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 16.7 W/(m·K)
	400.0 °C	18.3 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 18.3 W/(m·K)
	500.0 °C	19.8 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 19.8 W/(m·K)
	600.0 °C	21.3 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 21.3 W/(m·K)
	700.0 °C	22.8 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 22.8 W/(m·K)
	800.0 °C	24.3 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 24.3 W/(m·K)
	900.0 °C	25.7 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 25.7 W/(m·K)
	1000.0 °C	27.1 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 27.1 W/(m·K)
	Unlock all property charts

Elektrisch

Property	Temperature	Value
spezifischer Widerstand	20.0 °C	9.59E-7 - 1E-6 Ω·m Show Material materials with spezifischer Widerstand of 9.59E-7 - 1E-6 Ω·m
	100.0 °C	1.01E-6 Ω·m Show Material materials with spezifischer Widerstand of 1.01E-6 Ω·m
	200.0 °C	1.05E-6 Ω·m Show Material materials with spezifischer Widerstand of 1.05E-6 Ω·m
	300.0 °C	1.1E-6 Ω·m Show Material materials with spezifischer Widerstand of 1.1E-6 Ω·m
	400.0 °C	1.13E-6 Ω·m Show Material materials with spezifischer Widerstand of 1.13E-6 Ω·m
	500.0 °C	1.17E-6 Ω·m Show Material materials with spezifischer Widerstand of 1.17E-6 Ω·m
	600.0 °C	1.19E-6 Ω·m Show Material materials with spezifischer Widerstand of 1.19E-6 Ω·m
	700.0 °C	1.22E-6 Ω·m Show Material materials with spezifischer Widerstand of 1.22E-6 Ω·m
	800.0 °C	1.24E-6 Ω·m Show Material materials with spezifischer Widerstand of 1.24E-6 Ω·m
	900.0 °C	1.26E-6 Ω·m Show Material materials with spezifischer Widerstand of 1.26E-6 Ω·m
	1000.0 °C	1.28E-6 Ω·m Show Material materials with spezifischer Widerstand of 1.28E-6 Ω·m
	Unlock all property charts

Chemical properties

Property	Value
Chrom	19 - 21 % Show Material materials with Chrom of 19 - 21 %
Kohlenstoff	0.02 % Show Material materials with Kohlenstoff of 0.02 %
Kupfer	0.5 - 1.5 % Show Material materials with Kupfer of 0.5 - 1.5 %
Mangan	1 % Show Material materials with Mangan of 1 %
Molybdän	6 - 7 % Show Material materials with Molybdän of 6 - 7 %
Nickel	24 - 26 % Show Material materials with Nickel of 24 - 26 %
Phosphor	0.03 % Show Material materials with Phosphor of 0.03 %
Schwefel	0.01 % Show Material materials with Schwefel of 0.01 %
Silizium	0.5 % Show Material materials with Silizium of 0.5 %
Stickstoff	0.15 - 0.25 % Show Material materials with Stickstoff of 0.15 - 0.25 %

Looking for suppliers of this material? Click to see 8 supplier of EN 10216-5 Grade X1NiCrMoCuN25-20-7 solution annealed (+AT) on Matmatch

EN 10216-5 Grade X1NiCrMoCuN25-20-7 solution annealed (+AT)

Description

Related Standards

Equivalent Materials

Ashby charts

There are 5 other suppliers for this grade.

Preview all suppliers

Empfohlene Literatur

Eigenschaften