Stanyl® HFX31S

Nombres alternativos y comerciales
PA46-GF20 FR(40)

Want to keep this datasheet? Save it now in your required format

Description

Stanyl® is our high-performance polyamide 46 used for applications in automotive, E&E, gears and outdoor power equipments.
Stanyl® is a high performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear & friction and process flow qualities are required.
Because Stanyl retains its mechanical properties at high temperatures up to 220°C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP.

Datasheet URL:

Stanyl® HFX31S

Los datos sobre este material han sido proporcionados por DSM.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Value	Condition	Testing Standard	Comment
Absorción de agua	2.2 % Show Supplier Material materials with Absorción de agua of 2.2 %	dry	ISO 62	at 23°C after 24h
Densidad	1.36 g/cm³ Show Supplier Material materials with Densidad of 1.36 g/cm³	dry	ISO 1183
Moisture absorption	2.8 % Show Supplier Material materials with Moisture absorption of 2.8 %	dry	Sim. to ISO 62

Mecánica

Property	Temperature	Value	Condition	Thickness	Testing Standard	Comment
Elongación		2.9 % Show Supplier Material materials with Elongación of 2.9 %	dry	1 mm	ISO 527-1/-2
		3.2 % Show Supplier Material materials with Elongación of 3.2 %	dry	1 mm	ISO 527-1/-2
		3.4 % Show Supplier Material materials with Elongación of 3.4 %	conditioned		ISO 527-1/-2
Flexural yield strength		140 MPa Show Supplier Material materials with Flexural yield strength of 140 MPa	conditioned		ISO 178
		190 MPa Show Supplier Material materials with Flexural yield strength of 190 MPa	dry		ISO 178
Módulo de flexión		5 GPa Show Supplier Material materials with Módulo de flexión of 5 GPa	conditioned		ISO 178
		7.5 GPa Show Supplier Material materials with Módulo de flexión of 7.5 GPa	dry		ISO 178
Módulo elástico		5 GPa Show Supplier Material materials with Módulo elástico of 5 GPa	conditioned		ISO 527-1/-2
		7.5 GPa Show Supplier Material materials with Módulo elástico of 7.5 GPa	dry	1 mm	ISO 527-1/-2
		7.5 GPa Show Supplier Material materials with Módulo elástico of 7.5 GPa	dry	1 mm	ISO 527-1/-2
Resistencia a la tracción		85 MPa Show Supplier Material materials with Resistencia a la tracción of 85 MPa	conditioned		ISO 527-1/-2
		120 MPa Show Supplier Material materials with Resistencia a la tracción of 120 MPa	dry	1 mm	ISO 527-1/-2
		130 MPa Show Supplier Material materials with Resistencia a la tracción of 130 MPa	dry	1 mm	ISO 527-1/-2	at low thickness
Resistencia al choque, ensayo Charpy entallado	23 °C	7 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 7 kJ/m²	dry		ISO 179/1eA
	23 °C	10 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 10 kJ/m²	conditioned		ISO 179/1eA
Resistencia al choque, ensayo Charpy no entallado	23 °C	49 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy no entallado of 49 kJ/m²	dry		ISO 179/1eU
	23 °C	53 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy no entallado of 53 kJ/m²	conditioned		ISO 179/1eU

Aplicaciones térmicas

Property	Value	Condition	Testing Standard	Thickness	Pressure	Comment
Coeficiente de dilatación térmica	2.5e-07 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 2.5e-07 1/K	dry	ISO 11359-1/-2			Parallel
	6.5e-07 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 6.5e-07 1/K	dry	ISO 11359-1/-2			Normal
Relative temperature index, electrical	120 °C Show Supplier Material materials with Relative temperature index, electrical of 120 °C	dry	UL746B	0.2 mm
Relative temperature index, mechanical impact	65 °C Show Supplier Material materials with Relative temperature index, mechanical impact of 65 °C	dry	UL746B	0.2 mm
Relative temperature index, mechanical strength	65 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 65 °C	dry	UL746B	0.2 mm
Temperatura de flexión bajo carga	285 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 285 °C	dry	ISO 75-1/-2		2 MPa
Temperatura de fusión	295 °C Show Supplier Material materials with Temperatura de fusión of 295 °C	dry	ISO 11357-1/-3			10°C/min
Temperatura de transición del vidrio	75 °C Show Supplier Material materials with Temperatura de transición del vidrio of 75 °C	dry	ISO 11357-1/-2			10°C/min

Eléctrico

Property	Value	Condition	Testing Standard	Comment
Constante dieléctrica	3.6 [-] Show Supplier Material materials with Constante dieléctrica of 3.6 [-]	dry	IEC 60250	1GHz
	3.6 [-] Show Supplier Material materials with Constante dieléctrica of 3.6 [-]	dry	IEC 60250	10GHz
	3.7 [-] Show Supplier Material materials with Constante dieléctrica of 3.7 [-]	conditioned	IEC 60250	10GHz
	3.75 [-] Show Supplier Material materials with Constante dieléctrica of 3.75 [-]	conditioned	IEC 60250	1GHz
Factor de disipación	100 [-] Show Supplier Material materials with Factor de disipación of 100 [-]	dry	IEC 60250	1GHz
	100 [-] Show Supplier Material materials with Factor de disipación of 100 [-]	dry	IEC 60250	10GHz
	180 [-] Show Supplier Material materials with Factor de disipación of 180 [-]	conditioned	IEC 60250	10GHz
	210 [-] Show Supplier Material materials with Factor de disipación of 210 [-]	conditioned	IEC 60250	1GHz
Rigidez dieléctrica	30 kV/mm Show Supplier Material materials with Rigidez dieléctrica of 30 kV/mm	conditioned	IEC 60243-1
	33 kV/mm Show Supplier Material materials with Rigidez dieléctrica of 33 kV/mm	dry	IEC 60243-1
Surface resistivity	7e+14 Ω/sq Show Supplier Material materials with Surface resistivity of 7e+14 Ω/sq	conditioned	IEC 62631-3-2
Volume resistivity	4e+10 Ω·cm Show Supplier Material materials with Volume resistivity of 4e+10 Ω·cm	conditioned	IEC 62631-3-1
	1e+13 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+13 Ω·cm	dry	IEC 62631-3-1
Índice de seguimiento comparativo	550 V Show Supplier Material materials with Índice de seguimiento comparativo of 550 V	dry	IEC 60112

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Contracción	0.8 % Show Supplier Material materials with Contracción of 0.8 %	dry	ISO 294-4	Parallel
	1.3 % Show Supplier Material materials with Contracción of 1.3 %	dry	ISO 294-4	Normal
Spiral flow length	180	dry	-	1.0 mm 1000 bar

Technological properties

Property
Application areas	Reflow connectors (2)
Certifications	Yellow Card Available
Fillers	20% Glass Fiber

Stanyl® HFX31S

Description

Ashby charts

Usos

Materiales de este proveedor

Propiedades