G.AL® C250 ELOX PLUS, precision milled plate

Want to keep this datasheet? Save it now in your required format

Description

Rolling ingots are used for the production of G.AL® C250 ELOXPLUS plates. The chemical composition of these ingots is considerably limited in accordance with the GLEICH factory standard and extensive cleaning of the melt and specific casting parameters are required. Together with the specially-developed parameters of the subsequent heat treatment, Gleich produces aluminum plates which have excellent characteristics for anodizing and hard anodizing and thus the fulfill the highest technical and optical applications. As with G.AL® C250, G.AL® C250 ELOX PLUS is a precision cast plate, precision machined on both sides with protective foil.

Equivalent Materials

Los datos sobre este material han sido proporcionados por Gleich Aluminum.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value
Densidad	23.0 °C	2.66 g/cm³ Show Supplier Material materials with Densidad of 2.66 g/cm³
Rugosidad superficial		0.4 μm Show Supplier Material materials with Rugosidad superficial of 0.4 μm

Medidas

Property	Value
Ancho	1520 mm Show Supplier Material materials with Ancho of 1520 mm
Dimensions	Standard stock sizes: 1520mmx3020mm and 10-40mm in thickness

Mecánica

Property	Temperature	Value	Comment
Dureza Brinell (HBW)	23.0 °C	68 - 73 [-] Show Supplier Material materials with Dureza Brinell (HBW) of 68 - 73 [-]	Test method: 2.5/62.5
Elongación	23.0 °C	10 - 15 % Show Supplier Material materials with Elongación of 10 - 15 %
Límite elástico Rp 0,2	23.0 °C	110 - 130 MPa Show Supplier Material materials with Límite elástico Rp 0,2 of 110 - 130 MPa
Módulo elástico	23.0 °C	70 GPa Show Supplier Material materials with Módulo elástico of 70 GPa
Resistencia a la tracción	23.0 °C	230 - 260 MPa Show Supplier Material materials with Resistencia a la tracción of 230 - 260 MPa

Aplicaciones térmicas

Property	Temperature	Value
Calor específico	23.0 °C	900 J/(kg·K) Show Supplier Material materials with Calor específico of 900 J/(kg·K)
Coeficiente de dilatación térmica	23.0 °C	2.36E-5 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 2.36E-5 1/K
Conductividad térmica	23.0 °C	110 - 130 W/(m·K) Show Supplier Material materials with Conductividad térmica of 110 - 130 W/(m·K)

Eléctrico

Property	Temperature	Value
Conductividad eléctrica	23.0 °C	1.60E+7 - 1.80E+7 S/m Show Supplier Material materials with Conductividad eléctrica of 1.60E+7 - 1.80E+7 S/m

Technological properties

Property
Other	Non heat treatable alloy
Processing history	Temper: O3, homogenized and stress relieved

G.AL® C250 ELOX PLUS, precision milled plate

Description

Equivalent Materials

Ashby charts

Usos

Materiales de este proveedor

Propiedades