CERTAL® SPC, Al rolled plate

Want to keep this datasheet? Save it now in your required format

Description

Precision rolled plate UNIDAL® made form alloy EN AW 7019 (AlZn4Mg2), finely milled on both sides and covered with protective film, is characterized by a narrow tolerance of flatness and thickness and has only relatively low residual stresses. The good anodizing and welding capability opens up a wide range of applications for this product.

Equivalent Materials

Los datos sobre este material han sido proporcionados por Gleich Aluminum.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyTemperatureValue

Densidad

23.0 °C

2.76 g/cm³

Show Supplier Material materials with Densidad of 2.76 g/cm³

Medidas

PropertyValue

Dimensions

Standard stock sizes: 1020mm x 2020mm and 150-180mm in thickness (T651), 1520mm x 3020mm and 150-300mm in thickness (T652)

Mecánica

PropertyTemperatureValueComment

Dureza Brinell (HBW)

23.0 °C

140 - 160 [-]

Show Supplier Material materials with Dureza Brinell (HBW) of 140 - 160 [-]

Test method: 2.5/62.5

Elongación A50

23.0 °C

2 - 7 %

Show Supplier Material materials with Elongación A50 of 2 - 7 %

Límite elástico Rp 0,2

23.0 °C

430 - 460 MPa

Show Supplier Material materials with Límite elástico Rp 0,2 of 430 - 460 MPa

Módulo elástico

23.0 °C

72 GPa

Show Supplier Material materials with Módulo elástico of 72 GPa

Resistencia a la tracción

23.0 °C

490 - 530 MPa

Show Supplier Material materials with Resistencia a la tracción of 490 - 530 MPa

Aplicaciones térmicas

PropertyTemperatureValue

Calor específico

23.0 °C

873 J/(kg·K)

Show Supplier Material materials with Calor específico of 873 J/(kg·K)

Coeficiente de dilatación térmica

23.0 °C

2.36E-5 1/K

Show Supplier Material materials with Coeficiente de dilatación térmica of 2.36E-5 1/K

Conductividad térmica

23.0 °C

120 - 150 W/(m·K)

Show Supplier Material materials with Conductividad térmica of 120 - 150 W/(m·K)

Eléctrico

PropertyTemperatureValue

Conductividad eléctrica

23.0 °C

1.80E+7 - 2.20E+7 S/m

Show Supplier Material materials with Conductividad eléctrica of 1.80E+7 - 2.20E+7 S/m

Technological properties

Property
Other

Heat treatable alloy

Processing history

Temper: T651, T652