3M™ Dyneon™ (PTFE Granules TF 1620)

Want to keep this datasheet? Save it now in your required format

Description

Semi-free-flowing suspension PTFE for moulding of large compression moulded sheets, shaped parts and isostatic moulded articles with reduced moulding pressure.

Special Features are:

Meets ASTM D 4894 Type IV, Grade 2 classification

Produced by suspension polymerisation

Moulding powder with semi-free-flowing properties

Reduced moulding pressure of 20 MPa

Good surface quality of isostatically moulded articles

Excellent chemical inertness

Low friction behaviour

Good flame retardance

Exceptional temperature resistance

Typical Properties:

PTFE moulding powder with an average particle size of 220 μm which shows semi-free-flowing properties and requires a lower moulding pressure level compared to free-flowing type of products. The manufactured goods present good electrical and mechanical properties.

Los datos sobre este material han sido proporcionados por Matmatch.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value	Comment
Densidad	23.0 °C	2.15 g/cm³ Show Material materials with Densidad of 2.15 g/cm³	DIN EN ISO 12086
Densidad aparente	23.0 °C	0.87 g/cm³ Show Material materials with Densidad aparente of 0.87 g/cm³	DIN EN ISO 60
Tamaño de partícula		220000 nm Show Material materials with Tamaño de partícula of 220000 nm	ISO 13320, average value

Mecánica

Property	Temperature	Value	Comment
Dureza Shore D	23.0 °C	56 [-] Show Material materials with Dureza Shore D of 56 [-]	DIN EN ISO 868
Elongación	23.0 °C	400 % Show Material materials with Elongación of 400 %	DIN EN ISO 527-3, 0.2 mm film
Módulo elástico	23.0 °C	0.6 GPa Show Material materials with Módulo elástico of 0.6 GPa	DIN EN ISO 527
Resistencia a la tracción	23.0 °C	38 MPa Show Material materials with Resistencia a la tracción of 38 MPa	DIN EN ISO 527-3, 0.2 mm film

Aplicaciones térmicas

Property	Temperature	Value	Comment
Coeficiente de dilatación térmica	100.0 °C	1.2E-4 1/K Show Material materials with Coeficiente de dilatación térmica of 1.2E-4 1/K	DIN 53 752, from 30°C to the mentioned temperature
	200.0 °C	1.4E-4 1/K Show Material materials with Coeficiente de dilatación térmica of 1.4E-4 1/K	DIN 53 752, from 30°C to the mentioned temperature
	260.0 °C	1.7E-4 1/K Show Material materials with Coeficiente de dilatación térmica of 1.7E-4 1/K	DIN 53 752, from 30°C to the mentioned temperature

Conductividad térmica	23.0 °C	0.22 W/(m·K) Show Material materials with Conductividad térmica of 0.22 W/(m·K)	DIN 52612
Inflamabilidad	V-0 UL94

Eléctrico

Property	Temperature	Value	Comment
Resistividad eléctrica	23.0 °C	1.00E+16 Ω·m Show Material materials with Resistividad eléctrica of 1.00E+16 Ω·m	IEC 60093
Rigidez dieléctrica	23.0 °C	74 kV/mm Show Material materials with Rigidez dieléctrica of 74 kV/mm	DIN EN ISO 12086, 0.2 mm film
Surface resistivity	23.0 °C	1.00E+17 Ω/sq Show Material materials with Surface resistivity of 1.00E+17 Ω/sq	IEC 60093

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	2.9 % Show Material materials with Contracción of 2.9 %	Internal Dyneon method, Cylinder 45 mm diameter

Technological properties

Property
Application areas	3MTM DyneonTM PTFE Granules TF 1620 is a semi-free-flowing compression moulding powder for applications like large compression moulded sheets, isostatically moulded articles, shaped parts, thinner wall articles (like bellows etc.) and for skived films of > 200 μm.

3M™ Dyneon™ (PTFE Granules TF 1620)

Description

Ashby charts

Usos

Lectura sugerida

Propiedades