CYCOLAC™ Resin GRM2600L

Want to keep this datasheet? Save it now in your required format

Description

High Impact , good chemical resistance sheet grade ABS designed for refrigerator liner applications.

Los datos sobre este material han sido proporcionados por Matmatch.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyTemperatureValueComment

Densidad

23.0 °C

1.04 g/cm³

Show Material materials with Densidad of 1.04 g/cm³

ASTM D 792

Mecánica

PropertyTemperatureValueComment

Elongación

23.0 °C

55 %

Show Material materials with Elongación of 55 %

ASTM D 638 | Type I, 5 mm/min

Flexural yield strength

23.0 °C

75 MPa

Show Material materials with Flexural yield strength of 75 MPa

ASTM D 790 | 1.3 mm/min, 50 mm span

Impact strength, Izod notched, ASTM

23.0 °C

400 J/m

Show Material materials with Impact strength, Izod notched, ASTM of 400 J/m

ASTM D 256

Límite elástico

23.0 °C

41 MPa

Show Material materials with Límite elástico of 41 MPa

ASTM D 638 | Type I, 5 mm/min

Módulo de flexión

23.0 °C

2.3 GPa

Show Material materials with Módulo de flexión of 2.3 GPa

ASTM D 790 | 1.3 mm/min, 50 mm span

Módulo elástico

23.0 °C

2.41 GPa

Show Material materials with Módulo elástico of 2.41 GPa

ASTM D 638 | 5 mm/min

Resistencia a la tracción

23.0 °C

35 MPa

Show Material materials with Resistencia a la tracción of 35 MPa

ASTM D 638 | Type I, 5 mm/min

Aplicaciones térmicas

PropertyTemperatureValueComment

Coeficiente de dilatación térmica transversal

23.0 °C

7.2E-5 1/K

Show Material materials with Coeficiente de dilatación térmica transversal of 7.2E-5 1/K

ASTM E 831 | -40°C to 40°C

Heat deflection temperature, 1.80 MPa

85 °C

Show Material materials with Heat deflection temperature, 1.80 MPa of 85 °C

ASTM D 648 | 1.82 MPa, 3.2mm, unannealed

Temperatura de reblandecimiento Vicat

113 °C

Show Material materials with Temperatura de reblandecimiento Vicat of 113 °C

ASTM D 1525 | Rate B/50

Rheological Properties

PropertyTemperatureValueComment

Contracción

23.0 °C

0.45 - 0.65 %

Show Material materials with Contracción of 0.45 - 0.65 %

SABIC method | 3.2 mm

Velocidad de flujo de la masa derretida

2.5 g/10min

Show Material materials with Velocidad de flujo de la masa derretida of 2.5 g/10min

ASTM D 1238 | 220°C/10 kg

Technological properties

Property
Application areas

Building/Construction Sheet,Enclosures,Fixture Bath/Shower,Fluid Delivery,Laundry Dryer,Refrigerator,Semiconductor,Washing Machine

Processing methods

Drying Temperature: 90-95°C, Drying Time: 2-4hrs, Drying Time (Cumulative): 8hrs, Maximum Moisture Content: 0.02%, Melt Temperature: 230-275°C, Nozzle Temperature: 230-275°C, Front - Zone 3 Temperature: 230-255°C, Middle - Zone 2 Temperature: 210-225°C, Rear - Zone 1 Temperature: 195-210°C, Mold Temperature: 50-80°C, Back Pressure: 0.3-0.7MPa, Screw Speed: 30-60rpm, Shot to Cylinder Size: 50-70%, Vent Depth: 0.038-0.051mm, Drying Temperature: 80-95°C, Drying Time: 4hrs, Maximum Moisture Content: 0.02%, Melt Temperature: 215-260°C, Barrel - Zone 1 Temperature: 170-200°C, Barrel - Zone 2 Temperature: 180-220°C, Barrel - Zone 3 Temperature: 190-225°C, Barrel - Zone 4 Temperature: 200-240°C, Adapter Temperature: 205-250°C, Die Temperature: 205-250°C, Roll Stack Temp - Top: 90-95°C, Roll Stack Temp - Middle: 95-105°C, Roll Stack Temp - Bottom: 100-105°C