SABIC® HDPE P4200RT

Want to keep this datasheet? Save it now in your required format

Description

SABIC HDPE P4200RT is a high-density polyethylene (HDPE) with high melt viscosity for extrusion. The product provides excellent stress crack resistance properties (ESCR) combined with very good long-term hydrostatic strength, high heat & extremely high extraction stability. It is designed to fulfill all the requirements of DIN 16833 / ISO 24033 for PE-RT Type II.

Los datos sobre este material han sido proporcionados por Matmatch.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

Propiedades

General

PropertyTemperatureValueComment

Densidad

23.0 °C

0.95 g/cm³

Show Material materials with Densidad of 0.95 g/cm³

ISO 1183

Mecánica

PropertyTemperatureValueComment

Dureza Shore D

23.0 °C

59 [-]

Show Material materials with Dureza Shore D of 59 [-]

ISO 868

Elongation at yield

23.0 °C

8 %

Show Material materials with Elongation at yield of 8 %

ISO 527-2

Límite elástico

23.0 °C

22 MPa

Show Material materials with Límite elástico of 22 MPa

ISO 527-2

Resistencia al choque, ensayo Charpy entallado

-30.0 °C

8 kJ/m²

Show Material materials with Resistencia al choque, ensayo Charpy entallado of 8 kJ/m²

ISO 179

23.0 °C

24 kJ/m²

Show Material materials with Resistencia al choque, ensayo Charpy entallado of 24 kJ/m²

ISO 179

Aplicaciones térmicas

PropertyValueComment

Temperatura de reblandecimiento Vicat

70 °C

Show Material materials with Temperatura de reblandecimiento Vicat of 70 °C

ISO 306 | 50N (VST/B)

Technological properties

Property
Application areas

Pipe,Ground floor heating