Propiedades
General
| Property | Temperature | Value | Comment |
|---|---|---|---|
Densidad | 23.0 °C | 1.04 g/cm³ Show Material materials with Densidad of 1.04 g/cm³ | ASTM D 792 |
Mecánica
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elongación | 23.0 °C | 27 % Show Material materials with Elongación of 27 % | ASTM D 638 | Type I, 5 mm/min |
Elongation at yield | 23.0 °C | 2.6 % Show Material materials with Elongation at yield of 2.6 % | ASTM D 638 | Type I, 5 mm/min |
Flexural yield strength | 23.0 °C | 69 MPa Show Material materials with Flexural yield strength of 69 MPa | ISO 178 | 2 mm/min |
Hardness, Rockwell R | 23.0 °C | 104 [-] Show Material materials with Hardness, Rockwell R of 104 [-] | ASTM D 785 |
Impact strength, Izod notched, ASTM | 23.0 °C | 240 - 300 J/m Show Material materials with Impact strength, Izod notched, ASTM of 240 - 300 J/m | ASTM D 256 |
Límite elástico | 23.0 °C | 42 MPa Show Material materials with Límite elástico of 42 MPa | ASTM D 638 | Type I, 5 mm/min |
Módulo de flexión | 23.0 °C | 2.17 GPa Show Material materials with Módulo de flexión of 2.17 GPa | ISO 178 | 2 mm/min |
Módulo elástico | 23.0 °C | 2.37 GPa Show Material materials with Módulo elástico of 2.37 GPa | ASTM D 638 | 5 mm/min |
Resistencia a la tracción | 23.0 °C | 33 MPa Show Material materials with Resistencia a la tracción of 33 MPa | ASTM D 638 | Type I, 5 mm/min |
Resistencia al choque, ensayo Charpy entallado | -30.0 °C | 11 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy entallado of 11 kJ/m² | ISO 179/1eA |
23.0 °C | 25 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy entallado of 25 kJ/m² | ISO 179/1eA | |
Resistencia al choque, ensayo Izod entallado | -40.0 °C | 9 kJ/m² Show Material materials with Resistencia al choque, ensayo Izod entallado of 9 kJ/m² | ISO 180/1A |
-30.0 °C | 10 kJ/m² Show Material materials with Resistencia al choque, ensayo Izod entallado of 10 kJ/m² | ISO 180/1A | |
23.0 °C | 25 kJ/m² Show Material materials with Resistencia al choque, ensayo Izod entallado of 25 kJ/m² | ISO 180/1A | |
Aplicaciones térmicas
| Property | Value | Comment | |
|---|---|---|---|
Heat deflection temperature, 1.80 MPa | 93 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 93 °C | ASTM D 648 | 1.82 MPa, 6.4 mm, unannealed | |
Relative temperature index, electrical | 60 °C Show Material materials with Relative temperature index, electrical of 60 °C | UL 746B | |
Relative temperature index, mechanical impact | 60 °C Show Material materials with Relative temperature index, mechanical impact of 60 °C | UL 746B | |
Relative temperature index, mechanical strength | 60 °C Show Material materials with Relative temperature index, mechanical strength of 60 °C | UL 746B | |
Temperatura de reblandecimiento Vicat | 106 °C Show Material materials with Temperatura de reblandecimiento Vicat of 106 °C | ISO 306 | Rate B/120 | |
Inflamabilidad | UL Recognized, 94HB Flame Class Rating | 1.5mm | UL 94 | ||
Rheological Properties
| Property | Temperature | Value | Comment |
|---|---|---|---|
Contracción | 23.0 °C | 0.5 - 0.8 % Show Material materials with Contracción of 0.5 - 0.8 % | SABIC method | 3.2 mm |
Velocidad de flujo de la masa derretida | 10 g/10min Show Material materials with Velocidad de flujo de la masa derretida of 10 g/10min | ISO 1133 | 220°C/10.0 kg |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Air Cabin Interiors,Applique,Auto Aftermarket,Cladding,Cluster,Console,Cowl Vent Grille,Doors Hardware/Trim,Electronic Components,Enclosures,Exterior Mirror,Exterior Trim,Food Processor,Front Grille,Glove Box,Infotainment/Telematic,Interior,Overhead,Rear/Signal Lighting,Recreational Vehicle,Seat,Spoiler,Surgical Devices,Trim | |
| Processing methods | Drying Temperature: 90-95°C, Drying Time: 2-4hrs, Drying Time (Cumulative): 8hrs, Maximum Moisture Content: 0.1%, Melt Temperature: 230-275°C, Nozzle Temperature: 230-275°C, Front - Zone 3 Temperature: 230-255°C, Middle - Zone 2 Temperature: 210-225°C, Rear - Zone 1 Temperature: 195-210°C, Mold Temperature: 50-80°C, Back Pressure: 0.3-0.7MPa, Screw Speed: 30-60rpm, Shot to Cylinder Size: 50-70%, Vent Depth: 0.038-0.051mm | |