Zytel® 73G45 BK263

Nombres alternativos y comerciales
PA6-GF45

Want to keep this datasheet? Save it now in your required format

Description

Common features of Zytel® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel® nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel® nylon resin, including most flame retardant grades, offer the ability to be coloured. The good melt stability of Zytel® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.Zytel® nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.Zytel® 73G45 BK263 is a 45% glass fiber reinforced, black polyamide 6 resin for injection molding.

Equivalent Materials

Los datos sobre este material han sido proporcionados por Matmatch.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value	Comment
Absorción de agua	23.0 °C	4.9 % Show Material materials with Absorción de agua of 4.9 %	Sim. to ISO 62 \| 80mil
Densidad	23.0 °C	1.51 g/cm³ Show Material materials with Densidad of 1.51 g/cm³	ISO 1183

Mecánica

Property	Temperature	Value	Comment
Coeficiente de Poisson	23.0 °C	0.33 [-] Show Material materials with Coeficiente de Poisson of 0.33 [-]
Elongación	23.0 °C	3 % Show Material materials with Elongación of 3 %	ISO 527-1/-2
Módulo elástico	23.0 °C	14.2 GPa Show Material materials with Módulo elástico of 14.2 GPa	ISO 527-1/-2
Resistencia a la tracción	23.0 °C	215 MPa Show Material materials with Resistencia a la tracción of 215 MPa	ISO 527-1/-2
Resistencia al choque, ensayo Charpy entallado	23.0 °C	19 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy entallado of 19 kJ/m²	ISO 179/1eA
Resistencia al choque, ensayo Charpy no entallado	23.0 °C	100 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy no entallado of 100 kJ/m²	ISO 179/1eU
Resistencia al choque, ensayo Izod no entallado	23.0 °C	17 kJ/m² Show Material materials with Resistencia al choque, ensayo Izod no entallado of 17 kJ/m²	ISO 180/1A

Aplicaciones térmicas

Property	Temperature	Value	Comment
Calor específico	23.0 °C	2100 J/(kg·K) Show Material materials with Calor específico of 2100 J/(kg·K)	of melt
Heat deflection temperature, 1.80 MPa		218 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 218 °C	ISO 75-1/-2
Temperatura de fusión		221 °C Show Material materials with Temperatura de fusión of 221 °C	ISO 11357-1/-3 \| 18°F/min
Inflamabilidad	FMVSS Class: B -, Burning rate, Thickness 1 mm: 44 mm/min

Eléctrico

Property	Temperature	Value	Comment
Índice de seguimiento comparativo	23.0 °C	500 V Show Material materials with Índice de seguimiento comparativo of 500 V	IEC 60112

Rheological Properties

Property	Temperature	Value	Comment
Contracción	23.0 °C	0.1 % Show Material materials with Contracción of 0.1 %	ISO 294-4, 2577
Contracción transversal	23.0 °C	0.6 % Show Material materials with Contracción transversal of 0.6 %	ISO 294-4, 2577

Technological properties

Property
Fillers	45% Glass Fiber
Processing methods	Drying Recommended: yes, Drying Temperature: 80°C, Drying Time, Dehumidified Dryer: 2-4h, Processing Moisture Content: ≤0.2%, Melt Temperature Optimum: 270°C, Min. melt temperature: 260°C, Max. melt temperature: 280°C, Max. screw tangential speed: 0.2m/s, Mold Temperature Optimum: 100°C, Min. mold temperature: 70°C, Max. mold temperature: 120°C, Hold pressure range: 50-100MPa, Hold pressure time: 3s/mm, Ejection temperature: 210°C

Zytel® 73G45 BK263

Description

Equivalent Materials

Ashby charts

Lectura sugerida

Propiedades