Propiedades
General
| Property | Value |
|---|---|
Densidad | 1.48 - 1.51 g/cm³ Show Material materials with Densidad of 1.48 - 1.51 g/cm³ |
Mecánica
| Property | Value | Comment |
|---|---|---|
Elongación | 5.5 - 8.0 % Show Material materials with Elongación of 5.5 - 8.0 % | |
Módulo elástico | 7.0 - 12.0 GPa Show Material materials with Módulo elástico of 7.0 - 12.0 GPa | |
Resistencia a la tracción | 100.0 - 140.0 MPa Show Material materials with Resistencia a la tracción of 100.0 - 140.0 MPa | at 5.5-8% strain |
Resistencia al choque, ensayo Charpy entallado | 21.0 - 25.0 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy entallado of 21.0 - 25.0 kJ/m² | |
Resistencia al choque, ensayo Charpy no entallado | 100 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy no entallado of 100 kJ/m² | |
105 kJ/m² Show Material materials with Resistencia al choque, ensayo Charpy no entallado of 105 kJ/m² |
Aplicaciones térmicas
| Property | Value |
|---|---|
Coeficiente de dilatación térmica | 2.5e-05 - 5e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.5e-05 - 5e-05 1/K |
Conductividad térmica | 0.27 W/(m·K) Show Material materials with Conductividad térmica of 0.27 W/(m·K) |
Temperatura de fusión | 295 °C Show Material materials with Temperatura de fusión of 295 °C |
Inflamabilidad | UL 94 HB |
Eléctrico
| Property | Value |
|---|---|
Constante dieléctrica | 4.5 [-] Show Material materials with Constante dieléctrica of 4.5 [-] |
16 [-] Show Material materials with Constante dieléctrica of 16 [-] | |
Resistividad eléctrica | 100000000.0 - 10000000000.0 Ω·m Show Material materials with Resistividad eléctrica of 100000000.0 - 10000000000.0 Ω·m |
Óptico
| Property | Value |
|---|---|
Transparencia | no |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Brushholders, e-motor bobbins, charge air cooler caps, coil insulation, EGR sensors, hot charged air ducts | |
| Fillers | 40% Glass Fiber | |
| Other | You are viewing a generic polymer page, for more information please contact the suppliers or Matmatch, or use our Search under the following link to find more specific grades and formulations based on your application: Polymer Advanced Search | |
| Processing methods | Injection molding | |