EN 573-3 Grade AW-2017A O

Want to keep this datasheet? Save it now in your required format

Description

The material EN AW-Al Cu4mgSi(A) is produced for sheet, strip and plates, for extruded and drawn components as well as for wire and prewire for mechanical application. It is used for forged parts and prematerial. The alloy is not food-safe. To the comparable mark AlCuMg1, material No. 3.1325, acc. to DIN 1725-1 applies: The alloy pertains to the alloy-type (AlCuMg-Typ) used as the first of the aluminium- forgeable materials in technics. Alloys of this type are usable for natural and artificial aging. They achieve high mechanical strength and they are relatively heat-resistant even in a soft condition. In age hardened condition the material achieves strength above 400 N/mm². Heat-treatment for hardening: Solution annealing: 495° to 505°C, quenching in water Natural aging: 5 to 8 d at RT Artificial aging:16 to 24 h at 180 to 195°C Artificial aging is impossible in practice due to the decreasing corrosion resistance in artificially aged material condition. Even in a naturally aged condition is a surface protection necessary. Considerable strength decrease as well as complicate weldability and hot workability of this alloy as a result of insignificant heat-treatment failures are very unfavorable. Additionally, by welding is caused an economically unacceptable strength loss in the weld seam sector. The application of this material in welding constructions is for economical reasons impossible. It has a very favorable machinability what justifies the application of screws and rivets as connecting elements. The alloy AlCuMg1 is particularly well suitable for construction parts of a higher static load. Application: in machine engineering (incl. mold making) for machine benches, hydraulic turned parts, for tools, appliances (anchor plates, head and punch unit holder plates as well as guide plate). As connecting elements (screws, solid rivets), in vehicle engineering as bumper, axle bearing cases, as body and safety parts and in transport for air freight container as well as in aircraft construction.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM,AluKey.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Lectura sugerida

6061-T6 Aluminium – The Ultimate Guide

7075-T6 Aluminium: Overview & Properties

Aircraft Aluminium Grades

Cast vs. Wrought Aluminium: Standards, Properties and Applications

Precipitation Hardening (Age Hardening)

Mostrar todo

Do you supply similar materials?

List your company on Matmatch now and reach engineers around the world looking for such materials.

Request more information

Propiedades

General

Property	Temperature	Value	Condition	Related Standards	Shape
Densidad		2.8 g/cm³ Show Material materials with Densidad of 2.8 g/cm³	O	EN 573-3, EN 1715-3, EN 485, EN 754, EN 755	Strip, Sheet, Plate, Tube, Bar
	20.0 °C	2.8 g/cm³ Show Material materials with Densidad of 2.8 g/cm³	O	EN 573-3	Rod, Flat, Tube

Mecánica

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Bending Fatigue Strength		90.0 MPa Show Material materials with Bending Fatigue Strength of 90.0 MPa	O	EN 573-3, EN 485, EN 754, EN 755	Strip, Sheet, Plate, Tube, Bar
Coeficiente de Poisson		0.33 [-] Show Material materials with Coeficiente de Poisson of 0.33 [-]				Typical for Wrought 2000 Series Aluminium
Dureza Brinell		55.0 [-] Show Material materials with Dureza Brinell of 55.0 [-]	O	EN 573-3, EN 485	Strip, Sheet, Plate, Tube, Bar
	20.0 °C	45.0 [-] Show Material materials with Dureza Brinell of 45.0 [-]	O	EN 573-3	Rod, Tube
	20.0 °C	55.0 [-] Show Material materials with Dureza Brinell of 55.0 [-]	O	EN 573-3	Flat
	20.0 °C	55.0 [-] Show Material materials with Dureza Brinell of 55.0 [-]	O	EN 573-3	Flat	Transverse
Elongación		10.0 % Show Material materials with Elongación of 10.0 %	O	EN 573-3, EN 754, EN 755	Strip, Sheet, Plate, Tube, Bar	A50
		12.0 % Show Material materials with Elongación of 12.0 %	O	EN 573-3, EN 485	Strip, Sheet, Plate, Tube, Bar	A50
		12.0 % Show Material materials with Elongación of 12.0 %	O	EN 573-3, EN 485, EN 754, EN 755	Strip, Sheet, Plate, Tube, Bar	A100
		13.0 % Show Material materials with Elongación of 13.0 %	O	EN 573-3, EN 485	Strip, Sheet, Plate, Tube, Bar	A50
		14.0 % Show Material materials with Elongación of 14.0 %	O	EN 573-3, EN 485	Strip, Sheet, Plate, Tube, Bar	A50
	20.0 °C	10.0 % Show Material materials with Elongación of 10.0 %	O	EN 573-3	Rod, Tube	A50
	20.0 °C	12.0 % Show Material materials with Elongación of 12.0 %	O	EN 573-3	Flat	A50
	20.0 °C	12.0 % Show Material materials with Elongación of 12.0 %	O	EN 573-3	Flat, Rod, Tube
	20.0 °C	12.0 % Show Material materials with Elongación of 12.0 %	O	EN 573-3	Flat	A50 Transverse
	20.0 °C	12.0 % Show Material materials with Elongación of 12.0 %	O	EN 573-3	Flat	Transverse
	20.0 °C	13.0 % Show Material materials with Elongación of 13.0 %	O	EN 573-3	Flat	A50
	20.0 °C	13.0 % Show Material materials with Elongación of 13.0 %	O	EN 573-3	Flat	A50 Transverse
	20.0 °C	14.0 % Show Material materials with Elongación of 14.0 %	O	EN 573-3	Flat	A50
	20.0 °C	14.0 % Show Material materials with Elongación of 14.0 %	O	EN 573-3	Flat	A50 Transverse
Módulo de cizallamiento		27.2 GPa Show Material materials with Módulo de cizallamiento of 27.2 GPa	O	EN 573-3, EN 1715-3, EN 485, EN 754, EN 755	Strip, Sheet, Plate, Tube, Bar
	20.0 °C	26.0 - 28.5 GPa Show Material materials with Módulo de cizallamiento of 26.0 - 28.5 GPa	O	EN 573-3	Rod, Flat, Tube
Módulo elástico		72.5 GPa Show Material materials with Módulo elástico of 72.5 GPa	O	EN 573-3, EN 1715-3, EN 485, EN 754, EN 755	Strip, Sheet, Plate, Tube, Bar
	20.0 °C	65.0 - 73.5 GPa Show Material materials with Módulo elástico of 65.0 - 73.5 GPa	O	EN 573-3	Rod, Flat, Tube
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m				Typical for Wrought 2000 Series Aluminium
Resistencia a la tracción		150.0 - 220.0 MPa Show Material materials with Resistencia a la tracción of 150.0 - 220.0 MPa	O	EN 573-3, EN 1715-3	Strip, Sheet, Plate, Tube, Bar
		225.0 MPa Show Material materials with Resistencia a la tracción of 225.0 MPa	O	EN 573-3, EN 485	Strip, Sheet, Plate, Tube, Bar
		240.0 MPa Show Material materials with Resistencia a la tracción of 240.0 MPa	O	EN 573-3, EN 754	Strip, Sheet, Plate, Tube, Bar
		250.0 MPa Show Material materials with Resistencia a la tracción of 250.0 MPa	O	EN 573-3, EN 755	Strip, Sheet, Plate, Tube, Bar
	20.0 °C	225.0 MPa Show Material materials with Resistencia a la tracción of 225.0 MPa	O	EN 573-3	Flat
	20.0 °C	225.0 MPa Show Material materials with Resistencia a la tracción of 225.0 MPa	O	EN 573-3	Flat	Transverse
	20.0 °C	240.0 MPa Show Material materials with Resistencia a la tracción of 240.0 MPa	O	EN 573-3	Rod, Tube
	20.0 °C	250.0 MPa Show Material materials with Resistencia a la tracción of 250.0 MPa	O	EN 573-3	Rod, Tube
	20.0 °C	436.0 MPa Show Material materials with Resistencia a la tracción of 436.0 MPa	O	EN 573-3
	100.0 °C	394.0 MPa Show Material materials with Resistencia a la tracción of 394.0 MPa	O	EN 573-3
	150.0 °C	281.0 MPa Show Material materials with Resistencia a la tracción of 281.0 MPa	O	EN 573-3
	200.0 °C	155.0 MPa Show Material materials with Resistencia a la tracción of 155.0 MPa	O	EN 573-3
	250.0 °C	84.0 MPa Show Material materials with Resistencia a la tracción of 84.0 MPa	O	EN 573-3
	300.0 °C	46.0 MPa Show Material materials with Resistencia a la tracción of 46.0 MPa	O	EN 573-3
	370.0 °C	32.0 MPa Show Material materials with Resistencia a la tracción of 32.0 MPa	O	EN 573-3
Ángulo de flexión a 180°		0.5 °/t Show Material materials with Ángulo de flexión a 180° of 0.5 °/t	O	EN 573-3, EN 485	Strip, Sheet, Plate, Tube, Bar
		1.0 °/t Show Material materials with Ángulo de flexión a 180° of 1.0 °/t	O	EN 573-3, EN 485	Strip, Sheet, Plate, Tube, Bar
Ángulo de flexión a 90°		1.0 °/t Show Material materials with Ángulo de flexión a 90° of 1.0 °/t	O	EN 573-3, EN 485	Strip, Sheet, Plate, Tube, Bar
		1.5 °/t Show Material materials with Ángulo de flexión a 90° of 1.5 °/t	O	EN 573-3, EN 485	Strip, Sheet, Plate, Tube, Bar
		2.5 °/t Show Material materials with Ángulo de flexión a 90° of 2.5 °/t	O	EN 573-3, EN 485	Strip, Sheet, Plate, Tube, Bar
		4.0 °/t Show Material materials with Ángulo de flexión a 90° of 4.0 °/t	O	EN 573-3, EN 485	Strip, Sheet, Plate, Tube, Bar

Aplicaciones térmicas

Property	Temperature	Value	Condition	Related Standards	Shape
Calor específico	20.0 °C	921.0 J/(kg·K) Show Material materials with Calor específico of 921.0 J/(kg·K)	O	EN 573-3	Rod, Flat, Tube
Coeficiente de dilatación térmica	20 °C	2.3e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.3e-05 1/K	O	EN 573-3, EN 1715-3, EN 485, EN 754, EN 755	Strip, Sheet, Plate, Tube, Bar
	100 °C	2.3e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.3e-05 1/K	O	EN 573-3, EN 1715-3, EN 485, EN 754, EN 755	Strip, Sheet, Plate, Tube, Bar
Conductividad térmica	20.0 °C	130.0 - 200.0 W/(m·K) Show Material materials with Conductividad térmica of 130.0 - 200.0 W/(m·K)	O	EN 573-3, EN 1715-3, EN 485, EN 754, EN 755	Rod, Flat, Tube, Strip, Sheet, Plate, Bar
Temperatura de fusión		512.0 - 650.0 °C Show Material materials with Temperatura de fusión of 512.0 - 650.0 °C	O	EN 573-3, EN 1715-3, EN 485, EN 754, EN 755	Strip, Sheet, Plate, Tube, Bar

Eléctrico

Property	Temperature	Value	Condition	Related Standards	Shape
Conductividad eléctrica	20.0 °C	18000000.0 - 28000000.0 S/m Show Material materials with Conductividad eléctrica of 18000000.0 - 28000000.0 S/m	O	EN 573-3, EN 1715-3, EN 485, EN 754, EN 755	Rod, Flat, Tube, Strip, Sheet, Plate, Bar
Resistividad eléctrica		3.57e-08 - 5.56e-08 Ω·m Show Material materials with Resistividad eléctrica of 3.57e-08 - 5.56e-08 Ω·m	O	EN 573-3, EN 1715-3, EN 485, EN 754, EN 755	Strip, Sheet, Plate, Tube, Bar

Chemical properties

Property	Value	Condition	Related Standards	Shape
Cobre	3.5 - 4.5 % Show Material materials with Cobre of 3.5 - 4.5 %	O	EN 573-3, EN 1715-3, EN 485, EN 754, EN 755	Flat, Rod, Tube, Strip, Sheet, Plate, Bar
Cromo	0.1 % Show Material materials with Cromo of 0.1 %	O	EN 573-3, EN 1715-3, EN 485, EN 754, EN 755	Flat, Rod, Tube, Strip, Sheet, Plate, Bar
Hierro	0.7 % Show Material materials with Hierro of 0.7 %	O	EN 573-3	Flat, Rod, Tube
	0.70 % Show Material materials with Hierro of 0.70 %	O	EN 573-3, EN 1715-3, EN 485, EN 754, EN 755	Strip, Sheet, Plate, Tube, Bar
Magnesio	0.4 - 1.0 % Show Material materials with Magnesio of 0.4 - 1.0 %	O	EN 573-3, EN 1715-3, EN 485, EN 754, EN 755	Flat, Rod, Tube, Strip, Sheet, Plate, Bar
Manganeso	0.4 - 1.0 % Show Material materials with Manganeso of 0.4 - 1.0 %	O	EN 573-3, EN 1715-3, EN 485, EN 754, EN 755	Flat, Rod, Tube, Strip, Sheet, Plate, Bar
Silicona	0.2 - 0.8 % Show Material materials with Silicona of 0.2 - 0.8 %	O	EN 573-3, EN 1715-3, EN 485, EN 754, EN 755	Flat, Rod, Tube, Strip, Sheet, Plate, Bar
Zinc	0.25 % Show Material materials with Zinc of 0.25 %	O	EN 573-3, EN 1715-3, EN 485, EN 754, EN 755	Flat, Rod, Tube, Strip, Sheet, Plate, Bar

Technological properties

Property
Anodizing	decorative: not suitable, Protective: good
Brazing	hard brazing (with flux/ without flux): not suitable / not suitable, friction soldering: acceptable, soft brazing with flux: not suitable
Corrosion properties	Seawater: poor, weathering: sufficient
Workability	Bending / Spinning (cold): good / acceptable, Impact extrusion (cold): acceptable, Deep drawing / upsetting (Condition) acceptable (O) / acceptable (O)

Looking for suppliers of this material? Click to see 12 supplier of EN 573-3 Grade AW-2017A O on Matmatch