General
Property | Temperature | Value |
---|---|---|
Density | 23.0 °C | 8.9 g/cm³ Show Material materials with Density of 8.9 g/cm³ |
Mechanical
Property | Temperature | Value | Comment |
---|---|---|---|
Elastic modulus | 23.0 °C | 130 GPa Show Material materials with Elastic modulus of 130 GPa | |
Elongation | 23.0 °C | 35 - 42 % Show Material materials with Elongation of 35 - 42 % | |
Elongation A100 | 23.0 °C | 25 % Show Material materials with Elongation A100 of 25 % | |
Elongation A50 | 23.0 °C | 25 % Show Material materials with Elongation A50 of 25 % | |
Poisson's ratio | 23.0 °C | 0.34 [-] Show Material materials with Poisson's ratio of 0.34 [-] | Typical for Wrought Copper Pure / Low Alloyed Copper |
Shear modulus | 23.0 °C | 48 GPa Show Material materials with Shear modulus of 48 GPa | Typical for Wrought Copper Pure / Low Alloyed Copper |
Tensile strength | 23.0 °C | 200 - 250 MPa Show Material materials with Tensile strength of 200 - 250 MPa | |
Yield strength Rp0.2 | 23.0 °C | 100 - 120 MPa Show Material materials with Yield strength Rp0.2 of 100 - 120 MPa |
Thermal
Property | Temperature | Value | Comment |
---|---|---|---|
Coefficient of thermal expansion | 20.0 °C | 1.73E-5 1/K Show Material materials with Coefficient of thermal expansion of 1.73E-5 1/K | |
100.0 °C | 1.73E-5 1/K Show Material materials with Coefficient of thermal expansion of 1.73E-5 1/K | ||
Melting point | 1083 °C Show Material materials with Melting point of 1083 °C | ||
Specific heat capacity | 23.0 °C | 377 - 420 J/(kg·K) Show Material materials with Specific heat capacity of 377 - 420 J/(kg·K) | Typical for Wrought Copper Pure / Low Alloyed Copper |
Thermal conductivity | 23.0 °C | 393 W/(m·K) Show Material materials with Thermal conductivity of 393 W/(m·K) |
Electrical
Property | Temperature | Value |
---|---|---|
Electrical conductivity | 23.0 °C | 5.80E+7 S/m Show Material materials with Electrical conductivity of 5.80E+7 S/m |
Electrical resistivity | 23.0 °C | 1.72E-8 Ω·m Show Material materials with Electrical resistivity of 1.72E-8 Ω·m |
Chemical properties
Technological properties
Property | ||
---|---|---|
Brazing | hard brazing : good, soft brazing: very good | |
Workability | Cold forming degree between anneals: max. 90 %, general (condition): very good |