CEN/TS 13388 Grade CW023A R200

View suppliers (2)

Want to keep this datasheet? Save it now in your required format

Related Standards

CEN/TS 13388

Equivalent Materials

This material data has been provided by AluKey.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value
Density	23.0 °C	8.9 g/cm³ Show Material materials with Density of 8.9 g/cm³

Mechanical

Property	Temperature	Value	Comment
Elastic modulus	23.0 °C	95 - 98 GPa Show Material materials with Elastic modulus of 95 - 98 GPa	Typical for Wrought Copper Pure / Low Alloyed Copper
Elongation	23.0 °C	33 % Show Material materials with Elongation of 33 %
Hardness, Vickers	23.0 °C	55 [-] Show Material materials with Hardness, Vickers of 55 [-]
Poisson's ratio	23.0 °C	0.34 [-] Show Material materials with Poisson's ratio of 0.34 [-]	Typical for Wrought Copper Pure / Low Alloyed Copper
Shear modulus	23.0 °C	48 GPa Show Material materials with Shear modulus of 48 GPa	Typical for Wrought Copper Pure / Low Alloyed Copper
Tensile strength	23.0 °C	200 MPa Show Material materials with Tensile strength of 200 MPa
Yield strength Rp0.2	23.0 °C	40 MPa Show Material materials with Yield strength Rp0.2 of 40 MPa

Thermal

Property	Temperature	Value	Comment
Coefficient of thermal expansion	20.0 °C	1.73E-5 1/K Show Material materials with Coefficient of thermal expansion of 1.73E-5 1/K
	100.0 °C	1.73E-5 1/K Show Material materials with Coefficient of thermal expansion of 1.73E-5 1/K

Melting point		965 - 1100 °C Show Material materials with Melting point of 965 - 1100 °C	Typical for Wrought Copper Pure / Low Alloyed Copper
Specific heat capacity	23.0 °C	377 - 420 J/(kg·K) Show Material materials with Specific heat capacity of 377 - 420 J/(kg·K)	Typical for Wrought Copper Pure / Low Alloyed Copper
Thermal conductivity	23.0 °C	370 W/(m·K) Show Material materials with Thermal conductivity of 370 W/(m·K)

Electrical

Property	Temperature	Value
Electrical conductivity	23.0 °C	5.20E+7 S/m Show Material materials with Electrical conductivity of 5.20E+7 S/m
Electrical resistivity	23.0 °C	1.92E-8 Ω·m Show Material materials with Electrical resistivity of 1.92E-8 Ω·m

Chemical properties

Property	Value
Bismuth	5E-4 % Show Material materials with Bismuth of 5E-4 %
Copper	99.9 % Show Material materials with Copper of 99.9 %
Lead	5E-3 % Show Material materials with Lead of 5E-3 %
Other	total 0.03. excluded Ag, Ni, P
Phosphorus	0.01 % Show Material materials with Phosphorus of 0.01 %

Technological properties

Property
Brazing	soft brazing: very good
Workability	general (condition): very good

Looking for suppliers of this material? Click to see 2 supplier of CEN/TS 13388 Grade CW023A R200 on Matmatch

CEN/TS 13388 Grade CW023A R200

Related Standards

Equivalent Materials

Ashby charts

Suggested reading

Properties