CEN/TS 13388 Grade CW108C R250, H065

Want to keep this datasheet? Save it now in your required format

Related Standards

This material data has been provided by AluKey.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

Properties

General

PropertyTemperatureValue

Density

20.0 °C

8.9 g/cm³

Show Material materials with Density of 8.9 g/cm³

Dimension

PropertyValue

Dimensions

Durchmesser

Mechanical

PropertyTemperatureValue

Elongation

20.0 °C

25 %

Show Material materials with Elongation of 25 %

Elongation A100

20.0 °C

20 %

Show Material materials with Elongation A100 of 20 %

Hardness, Brinell

20.0 °C

65 - 95 [-]

Show Material materials with Hardness, Brinell of 65 - 95 [-]

Hardness, Vickers

20.0 °C

70 - 100 [-]

Show Material materials with Hardness, Vickers of 70 - 100 [-]

Tensile strength

20.0 °C

250 MPa

Show Material materials with Tensile strength of 250 MPa

Yield strength Rp0.2

20.0 °C

140 MPa

Show Material materials with Yield strength Rp0.2 of 140 MPa

Thermal

PropertyValue

Melting point

1038 - 1082 °C

Show Material materials with Melting point of 1038 - 1082 °C

Chemical properties

PropertyValue

Nickel

0.8 - 1.2 %

Show Material materials with Nickel of 0.8 - 1.2 %

Other

Rest Cu, total 0.1

Phosphorus

0.15 - 0.25 %

Show Material materials with Phosphorus of 0.15 - 0.25 %

Technological properties

Property
Brazing

hard brazing : good to medium, soft brazing: good

Workability

Cold forming degree between anneals: max. 75 % (lösungsgeglüht), general (condition): good (solution annealed)