1070A H18 Non-Heat Treatable Al Wrought Alloy

.XLSX
.PDF
Save

Description

Excellent surface finishing properties (bright, anodizing ...) and corrosion resistance.

Related Standards

Equivalent Materials

Properties

General

Density ρ

2.69 g/cm³ at 20 °C

Dimension

Thickness t

0.2 - 3 mm

Mechanical

Bending angle 90° θ90

2.5 °/t at 20 °C

according to EN 485-2

Elastic modulus E

70 GPa at 20 °C

Elongation A50 A50

2 % at 20 °C

according to EN 485-2

Hardness, HBW HBW

40 [-] at 20 °C

according to EN 485-2

Shear modulus G

26.5 GPa at 20 °C

Tensile strength Rm

125 MPa at 20 °C

according to EN 485-2

Yield strength YS

105 MPa at 20 °C

according to EN 485-2

Thermal

Coefficient of thermal expansion α

2.4E-5 1/K at 100 °C

20-100°C

Thermal conductivity λ

138 W/(m·K) at 20 °C

Electrical

Electrical resistivity ρel

4.9E-8 Ω·m at 20 °C

Chemical properties

Element

Weight %

Comment

Fe

0.25 %

Si

0.2 %

Zn

0.07 %

Cu

0.03 %

Mg

0.03 %

More

Technological properties

Anodizing

Excellent

Application areas

Facades: Single sheet, Sheets for composites/ sandwich Panels, Sheets for mechanized panels; Roofing: Single sheet, Sheets for composites/ sandwich Panels, Foil for bituminous coating; Doors: Sheets for composites/ sandwich Panels, Sheets for mechanized panels; Sun Protection Systems: Single sheet (covering, sun breakers and gutters); Interiors and ceilings: Single sheet, Sheets for composites/ sandwich Panels, Sheets for mechanized panels, Decoration; Furniture, Plinths, Blinds: Single sheet, Intermediate transformation/interior use; Lighting: Anodizing Quality, Lacquering quality; Electronic devices: Housing of devices; Tubes: Industrial tubes, Flexible tube, Pipes; Insulation; Solar: Solar collectors, Photovoltaic panels; Wind energy: Nacelle coverings, Rotor, Hub, Stairs; Cosmetics: Cosmetic pieces; Automotive trim: Interior trim, Windows frame, Marque badges

Corrosion properties

Excellent

Workability

Excellent

This material data has been provided by Aludium.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.