3004 H34 Non-Heat Treatable Al Wrought Alloy

Want to keep this datasheet? Save it now in your required format

Description

Stronger than 1200, 3003 and 3103 for similar applications. Good for chemical and food contact applications.

Related Standards

Equivalent Materials

Ashby charts

See where 3004 H34 Non-Heat Treatable Al Wrought Alloy falls on the material property chart for Density against Elastic modulus in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

Density

ρ

2.72 g/cm³ at 20 °C

Dimension

Thickness

t

0.2 - 1 mm

Mechanical

Bending angle 180°

θ180

2 °/t at 20 °C

Show 3000 Series materials with Bending angle 180° of 2 °/t at 20 °C

Bending angle 90°

θ90

0.5 °/t at 20 °C

Show 3000 Series materials with Bending angle 90° of 0.5 °/t at 20 °C

Elastic modulus

E

68.6 GPa at 20 °C

Show 3000 Series materials with Elastic modulus of 68.6 GPa at 20 °C

Elongation A50

A50

1 % at 20 °C

Show 3000 Series materials with Elongation A50 of 1 % at 20 °C

Hardness, HBW

HBW

66 [-] at 20 °C

Show 3000 Series materials with Hardness, HBW of 66 [-] at 20 °C

Shear modulus

G

26 GPa at 20 °C

Show 3000 Series materials with Shear modulus of 26 GPa at 20 °C

Tensile strength

Rm

190 - 265 MPa at 20 °C

Show 3000 Series materials with Tensile strength of 190 - 265 MPa at 20 °C

Yield strength

YS

170 MPa at 20 °C

Show 3000 Series materials with Yield strength of 170 MPa at 20 °C

Thermal

Coefficient of thermal expansion

α

2.4E-5 1/K at 100 °C

20-100°C

Thermal conductivity

λ

163 W/(m·K) at 20 °C

Electrical

Electrical resistivity

ρel

4.1E-8 Ω·m at 20 °C

Chemical properties

Element

Weight %

Comment

Mn

1 - 1.5 %

Mg

0.8 - 1.3 %

Fe

0.7 %

Si

0.3 %

Cu

0.25 %

More

Technological properties

Anodizing

Good (For surface protection only)

Application areas

Facades: Single sheet, Sheets for composites/ sandwich Panels, Sheets for mechanized panels; Roofing: Single sheet, Sheets for composites/ sandwich Panels, Foil for bituminous coating; Doors: Sheets for composites/ sandwich Panels, Sheets for mechanized panels; Sun Protection Systems: Single sheet (covering, sun breakers and gutters); Interiors and ceilings: Single sheet, Sheets for composites/ sandwich Panels, Sheets for mechanized panels; Furniture, Plinths, Blinds: Intermediate transformation/interior use; Heat exchangers: Fins; Wind energy: Nacelle coverings, Rotor, Hub, Stairs; Food can: Body, Lids; Semi-rigid and corrugated: Smooth wall

Brazing

Very Good

Corrosion properties

Good

Welding

Very Good

Workability

Good

This material data has been provided by Aludium.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.