3103A H22 Non-Heat Treatable Al Wrought Alloy

.XLSX
.PDF
Save

Description

Stronger and harder than 1200, yet retains comparable ductility and corrosion resistance.

Related Standards

Equivalent Materials

Properties

General

Density ρ

2.73 g/cm³ at 20 °C

Dimension

Thickness t

0.2 - 2 mm

Mechanical

Bending angle 180° θ180

1.5 °/t at 20 °C

Bending angle 90° θ90

0.5 °/t at 20 °C

Elastic modulus E

70 GPa at 20 °C

Elongation A50 A50

4 % at 20 °C

Hardness, HBW HBW

35 - 45 [-] at 20 °C

Shear modulus G

26.5 GPa at 20 °C

Tensile strength Rm

115 - 180 MPa at 20 °C

Yield strength YS

75 MPa at 20 °C

Thermal

Coefficient of thermal expansion α

2.3E-5 1/K at 100 °C

20-100°C

Thermal conductivity λ

176 W/(m·K) at 20 °C

Electrical

Electrical resistivity ρel

4.3E-8 Ω·m at 20 °C

Chemical properties

Element

Weight %

Comment

Fe

0.7 %

Mn

0.7 - 1.4 %

Si

0.5 %

Mg

0.3 %

Zn

0.2 %

More

Technological properties

Anodizing

Very Good

Application areas

Facades: Single sheet, Sheets for composites/ sandwich Panels, Sheets for mechanized panels; Roofing: Single sheet, Sheets for composites/ sandwich Panels; Doors: Sheets for composites/ sandwich Panels, Sheets for mechanized panels; Interiors and ceilings: Single sheet, Sheets for composites/ sandwich Panels, Sheets for mechanized panels; Furniture, Plinths, Blinds: Single sheet, Intermediate transformation/interior use; Anodizing Quality; Heat exchangers: Fins, Heat exchangers; Tubes: Flexible tube, Pipes; Cosmetics: Cosmetics pieces; Semi-rigid and corrugated: Smooth wall; Components: Automotive fins, Heat exchangers

Brazing

Excellent

Corrosion properties

Very Good

Workability

Very Good

This material data has been provided by Aludium.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.