Kynar Superflex® 2501-20

Alternative and trade names
PVDF

Want to keep this datasheet? Save it now in your required format

Description

Kynar Superflex® resin is a thermoplastic fluorinated polymer.

The properties are the same as standard grades: chemical resistance, resistance to UV, low permeation, high purity, excellent mechanical behavior.

More over, this grade is very flexible and is suitable in electrical isolation cable, tubing and co-extrusion.

This grade is available as powder form for injection, extrusion, compression

This material data has been provided by Arkema Technical Polymers.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Value	Condition	Testing Standard
Density	1.79 g/cm³ Show Supplier Material materials with Density of 1.79 g/cm³	dry	ISO 1183
Limiting oxygen index	44 % Show Supplier Material materials with Limiting oxygen index of 44 %	dry	ISO 4589-1/-2
Water absorption	0.03 % Show Supplier Material materials with Water absorption of 0.03 %		Sim. to ISO 62

Mechanical

Property	Value	Condition	Testing Standard	Comment
Elastic modulus	0.35 GPa Show Supplier Material materials with Elastic modulus of 0.35 GPa	dry	ISO 527-1/-2
Elongation	50 % Show Supplier Material materials with Elongation of 50 %	dry	ISO 527-1/-2	min. \| nominal
Elongation at yield	18 % Show Supplier Material materials with Elongation at yield of 18 %	dry	ISO 527-1/-2
Yield strength	10 MPa Show Supplier Material materials with Yield strength of 10 MPa	dry	ISO 527-1/-2

Thermal

Property	Value	Condition	Testing Standard	Pressure	Comment
Glass transition temperature	-40 °C Show Supplier Material materials with Glass transition temperature of -40 °C	dry	ISO 11357-1/-2		10°C/min
Heat deflection temperature	31 °C Show Supplier Material materials with Heat deflection temperature of 31 °C	dry	ISO 75-1/-2	2 MPa
Melting point	122 °C Show Supplier Material materials with Melting point of 122 °C	dry	ISO 11357-1/-3		10°C/min
Flammability	At thickness 1.5 mm IEC 60695-11-10: V-0, At thickness 1 mm IEC 60695-11-10: V-0 and yellow card available

Electrical

Property	Value	Condition	Testing Standard
Dielectric strength	12 kV/mm Show Supplier Material materials with Dielectric strength of 12 kV/mm	dry	IEC 60243-1

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Melt volume-flow rate	5.8 cm³/10min Show Supplier Material materials with Melt volume-flow rate of 5.8 cm³/10min	dry	ISO 1133	232°C/3.8kg

Technological properties

Property

Application areas

Fluoropolymer Processing Aids

Certifications

Yellow Card

Kynar Superflex® 2501-20

Description

Ashby charts

Applications

Materials by this supplier

Properties