Properties
General
| Property | Temperature | Value | Testing Standard |
|---|---|---|---|
Butadiene content | 27 % Show Supplier Material materials with Butadiene content of 27 % | Lab - IR | |
Density | 25 °C | 1.02 g/cm³ Show Supplier Material materials with Density of 1.02 g/cm³ | ISO 1183-1 |
Residual monomer | 300 mg/kg Show Supplier Material materials with Residual monomer of 300 mg/kg | Lab - CG |
Mechanical
| Property | Temperature | Value | Testing Standard | Comment |
|---|---|---|---|---|
Elastic modulus | 1.6 GPa Show Supplier Material materials with Elastic modulus of 1.6 GPa | ISO 527-1/2 | 1 mm/min | |
Elongation | 5 % Show Supplier Material materials with Elongation of 5 % | ISO 527-1/2 | min. | 50 mm/min | |
Flexural modulus | 1.7 GPa Show Supplier Material materials with Flexural modulus of 1.7 GPa | ISO 178 | 2 mm/min | |
Hardness, Ball Indentation | 72 MPa Show Supplier Material materials with Hardness, Ball Indentation of 72 MPa | ISO 2039-1 | ||
Impact strength, Izod notched | -30 °C | 21 kJ/m² Show Supplier Material materials with Impact strength, Izod notched of 21 kJ/m² | ISO 180-1A | |
23 °C | 28 kJ/m² Show Supplier Material materials with Impact strength, Izod notched of 28 kJ/m² | ISO 180-1A | ||
Yield strength | 35 MPa Show Supplier Material materials with Yield strength of 35 MPa | ISO 527-1/2 | 50 mm/min |
Thermal
| Property | Value | Testing Standard | Comment | ||
|---|---|---|---|---|---|
Glow Wire Flammability Index | 700 °C Show Supplier Material materials with Glow Wire Flammability Index of 700 °C | IEC 60695-2-12 | 2.0 mm | ||
Vicat softening temperature | 93 °C Show Supplier Material materials with Vicat softening temperature of 93 °C | ISO 306 | B50 | 50°C/h | ||
Flammability | At thickness 1.6 mm UL 94: HB. Burning rate US-FMVSS (150x105x1 mm): 60 mm/min according to ISO 3795 | ||||
Optical
| Property | Value | Testing Standard |
|---|---|---|
Yellowness Index | 31 [-] Show Supplier Material materials with Yellowness Index of 31 [-] | E313 |
Rheological Properties
| Property | Value | Testing Standard | Comment |
|---|---|---|---|
Melt volume-flow rate | 14 cm³/10min Show Supplier Material materials with Melt volume-flow rate of 14 cm³/10min | ISO 1133 | 220°C/10Kg |
Technological properties
| Property | ||
|---|---|---|
| Certifications | UL Certificate | |
| Handling recommendations | Please see the Material Safety Data Sheet for relevant health & safety information. | |
| Other | Control measurements in other places may issue different results due to influences of machinery, equipment, test method or storage conditions. | |
| Processing methods | Injection molding-melt temperature: 240 ºC according to ISO 294 Injection molding-mold temperature: 70 ºC according to ISO 294 Injection molding-injection velocity: 240 mm/s according to ISO 294 | |