Elix ABS HH 3114

Alternative and trade names
ISO 2580-1 ABS 2-M, MG, 115-08-09-20
Want to keep this datasheet? Save it now in your required format

Description

Key characteristics:

  • Increased flow.
  • Super low emission grade.
  • Very high vicat softening point ABS grade suitable for interior and exterior applications.
  • Lower mould deposits in injection molding processing applications.
  • Better dimensional under heat.

  • Related Standards

    This material data has been provided by Elix Polymers.

    "Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
    All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
    Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

    Ashby charts

    See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

    Properties

    General

    PropertyTemperatureValueTesting Standard

    Density

    25 °C

    1.04 g/cm³

    Show Supplier Material materials with Density of 1.04 g/cm³

    ISO 1183-1

    Mechanical

    PropertyTemperatureValueTesting StandardComment

    Elastic modulus

    2.2 GPa

    Show Supplier Material materials with Elastic modulus of 2.2 GPa

    ISO 527-1/2

    1 mm/min

    Elongation

    17 %

    Show Supplier Material materials with Elongation of 17 %

    ISO 527-1/2

    50 mm/min

    Flexural modulus

    2.4 GPa

    Show Supplier Material materials with Flexural modulus of 2.4 GPa

    ISO 527-1/2

    2 mm/min

    Flexural strength

    66 MPa

    Show Supplier Material materials with Flexural strength of 66 MPa

    ISO 178

    2 mm/min

    Hardness, Ball Indentation

    105 MPa

    Show Supplier Material materials with Hardness, Ball Indentation of 105 MPa

    ISO 2039-1

    Impact strength, Charpy notched

    23 °C

    13 kJ/m²

    Show Supplier Material materials with Impact strength, Charpy notched of 13 kJ/m²

    ISO 179-1eA

    Impact strength, Izod notched

    -30 °C

    8 kJ/m²

    Show Supplier Material materials with Impact strength, Izod notched of 8 kJ/m²

    ISO 180-1A

    23 °C

    13 kJ/m²

    Show Supplier Material materials with Impact strength, Izod notched of 13 kJ/m²

    ISO 180-1A

    Yield strength

    42 MPa

    Show Supplier Material materials with Yield strength of 42 MPa

    ISO 527-1/2

    50 mm/min

    Thermal

    PropertyValueTesting StandardPressureComment

    Coefficient of thermal expansion

    9.2e-05 1/K

    Show Supplier Material materials with Coefficient of thermal expansion of 9.2e-05 1/K

    ISO 11359-1/2

    23 to 55°C

    Heat deflection temperature

    104 °C

    Show Supplier Material materials with Heat deflection temperature of 104 °C

    ISO 75-1/2

    1.8 MPa

    112 °C

    Show Supplier Material materials with Heat deflection temperature of 112 °C

    ISO 75-1/2

    0.45 MPa

    Vicat softening temperature

    112 °C

    Show Supplier Material materials with Vicat softening temperature of 112 °C

    ISO 306

    B50 | 50°C/h

    114 °C

    Show Supplier Material materials with Vicat softening temperature of 114 °C

    ISO 306

    B120 | 120°C/h

    Flammability

    At thickness 1.6 mm UL 94: HB. Burning rate US-FMVSS (200x105x2 mm): < 55 mm/min according to ISO 3795

    Rheological Properties

    PropertyValueTesting StandardComment

    Melt volume-flow rate

    9 cm³/10min

    Show Supplier Material materials with Melt volume-flow rate of 9 cm³/10min

    ISO 1133

    220°C/10Kg

    Shrinkage

    0.35 - 0.4 %

    Show Supplier Material materials with Shrinkage of 0.35 - 0.4 %

    ISO 294-4

    60x60x2 mm

    0.4 - 0.55 %

    Show Supplier Material materials with Shrinkage of 0.4 - 0.55 %

    ISO 294-4

    60x60x2 mm, Transverse

    Technological properties

    Property
    Certifications

    UL Certificate

    Chemical composition

    Acrylonitrile-butadiene-styrene (ABS) copolymer modified with poly(styrene-co-maleimide) (SMI).

    Color

    White to slightly yellowish.

    Handling recommendations

    Please see the Material Safety Data Sheet for relevant health & safety information.

    Other

    Control measurements in other places may issue different results due to influences of machinery, equipment, test method or storage conditions.

    Processing methods

    Injection molding-melt temperature: 240 ºC according to ISO 294

    Injection molding-mold temperature: 70 ºC according to ISO 294

    Injection molding-injection velocity: 240 mm/s according to ISO 294