The material: 'Silicon Carbide SiC Powder 99.0% Purity (SI516022)' you were looking for has been superseded by the one below.

SiC SIKA DENSITEC L

Alternative and trade names
SIKA DENSITEC L

Want to keep this datasheet? Save it now in your required format

Description

DENSITEC-L is used for production of liquid phase sintered SiC and is a spray granulated powder based on our standard black SINTEX 13C. The powder is doped with oxides, temporary binders and pressing aids, and is ready to be pressed into a green body.

Ashby charts

See where SiC SIKA DENSITEC L falls on the material property chart for Density against Elastic modulus in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Bulk density

ρ_bulk

0.86 g/cm³ at 23 °C

Density

3.21 g/cm³ at 23 °C

Particle size range

d_range

100 µm

Mechanical

Elastic modulus

24 GPa at 23 °C

Plane-Strain Fracture Toughnes

K_IC

4.5 MPa·√m at 23 °C

Rheological Properties

Hall flow

22.5 s/50g at 23 °C

Technological properties

Application areas

Silicon Carbide Ready-To-Press granules for solid-state (SSiC) sintered technical ceramics.

Chemical composition

SiC type: SINTEX 13C; Al2O3: 5,5%; Y2O3: 3,5%; Moisture content: 1%; Binder content (total organic): 6%

This material data has been provided by Fiven GmbH.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.