Properties
General
| Property | Temperature | Value | Comment |
|---|---|---|---|
Density | 23.0 °C | 1.18 g/cm³ Show Supplier Material materials with Density of 1.18 g/cm³ | ASTM D792 |
Mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elastic modulus | 23.0 °C | 14.52 GPa Show Supplier Material materials with Elastic modulus of 14.52 GPa | ASTM D638 |
Elongation | 23.0 °C | 0.14 % Show Supplier Material materials with Elongation of 0.14 % | ASTM D638 |
Flexural modulus | 23.0 °C | 37.61 GPa Show Supplier Material materials with Flexural modulus of 37.61 GPa | ASTM D790 |
Flexural strength | 23.0 °C | 213.3 MPa Show Supplier Material materials with Flexural strength of 213.3 MPa | ASTM D790 |
Impact strength, Izod notched, ASTM | 23.0 °C | 146.3 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 146.3 J/m | ASTM D256 |
Tensile strength | 23.0 °C | 109 MPa Show Supplier Material materials with Tensile strength of 109 MPa | ASTM D638 |
Thermal
| Property | Value |
|---|---|
Flammability | HB ASTM D635, for 1.5mm |
Rheological Properties
| Property | Temperature | Value | Comment |
|---|---|---|---|
Shrinkage | 23.0 °C | 0.1 - 0.3 % Show Supplier Material materials with Shrinkage of 0.1 - 0.3 % | ASTM D955, (1/8 in (3.2 mm)section) |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Used for automotive interior decoration, power tools, sports equipment, lawnmowers and snow blowers, industrial parts, office equipment housings, etc . | |
| Color | Natural, and custom colors | |
| Fillers | 30% Long Carbon Fiber | |
| Processing methods | Injection Moulding. Injection Pressure 70 - 110 MPa, Melt Temperature 210 - 240 °C, Mould temperature 60 - 90 °C, Pre-drying 2- 4 hrs @ 80 - 95 °C, Moisture Content 0.01% | |