PA12 LGF50 LFT-G®

Alternative and trade names
LFT-G® PA12-NA-LGF50, PA12-LGF50
Want to keep this datasheet? Save it now in your required format

Description

Nylon 12 (Polyamide 12) reinforced with 50% long glass fiber, general grade. The key features are:


  • Durability
  • High toughness
  • High strength
  • This material data has been provided by Xiamen LFT Composite Plastic Co.,ltd.

    All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
    Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

    Ashby charts

    See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

    Properties

    General

    PropertyTemperatureValueComment

    Density

    23.0 °C

    1.46 g/cm³

    Show Supplier Material materials with Density of 1.46 g/cm³

    ASTM D792

    Mechanical

    PropertyTemperatureValueComment

    Elastic modulus

    23.0 °C

    11.72 GPa

    Show Supplier Material materials with Elastic modulus of 11.72 GPa

    ASTM D638

    Elongation

    23.0 °C

    2 - 3 %

    Show Supplier Material materials with Elongation of 2 - 3 %

    ASTM D638

    Flexural modulus

    23.0 °C

    8.28 GPa

    Show Supplier Material materials with Flexural modulus of 8.28 GPa

    ASTM D790

    Flexural strength

    23.0 °C

    255 MPa

    Show Supplier Material materials with Flexural strength of 255 MPa

    ASTM D790

    Impact strength, Izod notched, ASTM

    23.0 °C

    427 J/m

    Show Supplier Material materials with Impact strength, Izod notched, ASTM of 427 J/m

    ASTM D256

    Impact strength, Izod unnotched, ASTM

    23.0 °C

    1495 J/m

    Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 1495 J/m

    ASTM D4812

    Tensile strength

    23.0 °C

    162 MPa

    Show Supplier Material materials with Tensile strength of 162 MPa

    ASTM D638

    Thermal

    PropertyValue

    Flammability

    HB ASTM D635, for 1.5mm

    Rheological Properties

    PropertyTemperatureValueComment

    Shrinkage

    23.0 °C

    0.1 - 0.3 %

    Show Supplier Material materials with Shrinkage of 0.1 - 0.3 %

    ASTM D955, (1/8 in (3.2 mm)section)

    Technological properties

    Property
    Application areas

    It is used in automotive fuel pipes, brake brakes, air conditioning pipes, pneumatic equipment hoses, industrial high-pressure hydraulic pipe, pipe fittings, anti-lock solenoid system, precision gear, cam and bearing glide Anti-static capacitor and IC chip guide, cable sheath, transparent pipe, self-adhesive wire paint, VCD-ROM, printer/DVD-ROM silencer gear, sports shoes, cable ties, tennis Clapping and so on many aspects.

    Fillers

    50% Long Glass Fiber

    Processing methods

    Injection Moulding. Injection Pressure 69 - 124 MPa, Melt Temperature 243 - 271 °C, Mould temperature 54 - 93 °C, Pre-drying 2 hrs @ 82 °C, Moisture Content 0.2%, Dew Point -29°C