PEEK LCF40 LFT-G®

Alternative and trade names
LFT-G® PEEK-NA-LCF40, PEEK-CF40

Want to keep this datasheet? Save it now in your required format

Description

Polyetherether Ketone (PEEK) reinforced with 40% carbon fiber. The key features are:

Heat and chemical resistance

Low friction coefficient

Good load bearing

This material data has been provided by Xiamen LFT Composite Plastic Co.,ltd.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Properties

General

Property	Temperature	Value	Comment
Density	23.0 °C	1.45 g/cm³ Show Supplier Material materials with Density of 1.45 g/cm³	ASTM D792

Mechanical

Property	Temperature	Value	Comment
Elastic modulus	23.0 °C	37.89 GPa Show Supplier Material materials with Elastic modulus of 37.89 GPa	ASTM D790
Elongation	23.0 °C	0.7 % Show Supplier Material materials with Elongation of 0.7 %	ASTM D638
Flexural modulus	23.0 °C	25.39 GPa Show Supplier Material materials with Flexural modulus of 25.39 GPa	ASTM D790
Flexural strength	23.0 °C	304 MPa Show Supplier Material materials with Flexural strength of 304 MPa	ASTM D790
Impact strength, Izod unnotched, ASTM	23.0 °C	726 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 726 J/m	ASTM D4812
Tensile strength	23.0 °C	218 MPa Show Supplier Material materials with Tensile strength of 218 MPa	ASTM D638

Technological properties

Property
Application areas	Drone rack, Drone wing, 5G communication, Bone External Fixator bracket, Marine propellers.
Fillers	40% Carbon Fiber
Processing methods	Injection Molding

PEEK LCF40 LFT-G®

Description

Ashby charts

Applications

Materials by this supplier

Properties