Properties
General
| Property | Temperature | Value | Comment |
|---|---|---|---|
Density | 23.0 °C | 1.04 g/cm³ Show Material materials with Density of 1.04 g/cm³ | ASTM D 792 |
Mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elastic modulus | 23.0 °C | 1.92 GPa Show Material materials with Elastic modulus of 1.92 GPa | ISO 527 | 1 mm/min |
Elongation | 23.0 °C | 23.2 % Show Material materials with Elongation of 23.2 % | ISO 527 | 50 mm/min |
Elongation at yield | 23.0 °C | 3.5 % Show Material materials with Elongation at yield of 3.5 % | ISO 527 | 50 mm/min |
Flexural modulus | 23.0 °C | 2.02 GPa Show Material materials with Flexural modulus of 2.02 GPa | ISO 178 | 2 mm/min, 64mm |
Impact strength, Charpy notched | -30.0 °C | 3 kJ/m² Show Material materials with Impact strength, Charpy notched of 3 kJ/m² | ISO 179/1eA |
23.0 °C | 18 kJ/m² Show Material materials with Impact strength, Charpy notched of 18 kJ/m² | ISO 179/1eA | |
Impact strength, Izod notched | -30.0 °C | 4 kJ/m² Show Material materials with Impact strength, Izod notched of 4 kJ/m² | ISO 180/1A |
23.0 °C | 18 kJ/m² Show Material materials with Impact strength, Izod notched of 18 kJ/m² | ISO 180/1A | |
Tensile strength | 23.0 °C | 14 MPa Show Material materials with Tensile strength of 14 MPa | ISO 527 | 50 mm/min, 1A |
Yield strength | 23.0 °C | 20 MPa Show Material materials with Yield strength of 20 MPa | ISO 527 | 50 mm/min |
Thermal
| Property | Temperature | Value | Comment |
|---|---|---|---|
Coefficient of thermal expansion | -30.0 °C | 4.9E-5 1/K Show Material materials with Coefficient of thermal expansion of 4.9E-5 1/K | ISO 11359-2 |
Coefficient of thermal expansion, transverse | -30.0 °C | 1.47E-4 1/K Show Material materials with Coefficient of thermal expansion, transverse of 1.47E-4 1/K | ISO 11359-2 |
Heat deflection temperature, 1.80 MPa | 59 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 59 °C | ISO 75-1&2 | 1.8 MPa | |
Vicat softening temperature | 133 °C Show Material materials with Vicat softening temperature of 133 °C | ISO 306 | 10N, 50°C/hr |
Rheological Properties
| Property | Temperature | Value | Comment |
|---|---|---|---|
Melt mass-flow rate | 20 g/10min Show Material materials with Melt mass-flow rate of 20 g/10min | ISO 1133 | 230°C/2.16 kg | |
Shrinkage | 23.0 °C | 0.5 % Show Material materials with Shrinkage of 0.5 % | SABIC method | 48 hrs @ 23°C |
Shrinkage, transverse | 23.0 °C | 0.9 % Show Material materials with Shrinkage, transverse of 0.9 % | SABIC method | 48 hrs @ 23°C |
Technological properties
| Property | ||
|---|---|---|
| Fillers | Mineral Powder | |
| Processing methods | Drying Temperature: 80-100°C, Drying Time: 2-4hrs, Melt Temperature: 210-270°C, Nozzle Temperature: 210-270°C, Front - Zone 3 Temperature: 210-270°C, Middle - Zone 2 Temperature: 200-250°C, Rear - Zone 1 Temperature: 190-230°C, Mold Temperature: 15-60°C, Back Pressure: 1-1.5MPa | |