General
Property | Temperature | Value | Comment |
---|---|---|---|
Density | 23.0 °C | 0.97 g/cm³ Show Material materials with Density of 0.97 g/cm³ | ASTM D 792 |
Mechanical
Property | Temperature | Value | Comment |
---|---|---|---|
Elastic modulus | 23.0 °C | 1.65 GPa Show Material materials with Elastic modulus of 1.65 GPa | ISO 527 | 1 mm/min |
Elongation | 23.0 °C | 100 % Show Material materials with Elongation of 100 % | ISO 527 | 50 mm/min |
Flexural modulus | 23.0 °C | 1.76 GPa Show Material materials with Flexural modulus of 1.76 GPa | ISO 178 | 2 mm/min, 64mm |
Impact strength, Charpy notched | -30.0 °C | 6 kJ/m² Show Material materials with Impact strength, Charpy notched of 6 kJ/m² | ISO 179/1eA |
23.0 °C | 34 kJ/m² Show Material materials with Impact strength, Charpy notched of 34 kJ/m² | ISO 179/1eA | |
Impact strength, Izod notched | 23.0 °C | 41 kJ/m² Show Material materials with Impact strength, Izod notched of 41 kJ/m² | ISO 180/1A |
Tensile strength | 23.0 °C | 13 MPa Show Material materials with Tensile strength of 13 MPa | ISO 527 | 50 mm/min, 1A |
Yield strength | 23.0 °C | 19 MPa Show Material materials with Yield strength of 19 MPa | ISO 527 | 50 mm/min |
Thermal
Property | Temperature | Value | Comment |
---|---|---|---|
Coefficient of thermal expansion | 23.0 °C | 4.9E-5 1/K Show Material materials with Coefficient of thermal expansion of 4.9E-5 1/K | ISO 11359-2 | -30°C to 100°C |
Coefficient of thermal expansion, transverse | 23.0 °C | 1.27E-4 1/K Show Material materials with Coefficient of thermal expansion, transverse of 1.27E-4 1/K | ISO 11359-2 | -30°C to 100°C |
Heat deflection temperature, 1.80 MPa | 53 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 53 °C | ISO 75-1&2 | 1.8 MPa |
Rheological Properties
Property | Temperature | Value | Comment |
---|---|---|---|
Melt mass-flow rate | 34 g/10min Show Material materials with Melt mass-flow rate of 34 g/10min | ISO 1133 | 230°C/2.16 kg | |
Shrinkage | 23.0 °C | 0.71 % Show Material materials with Shrinkage of 0.71 % | SABIC method | 30 min, 120°C |
Shrinkage, transverse | 23.0 °C | 1.11 % Show Material materials with Shrinkage, transverse of 1.11 % | SABIC method | 30 min, 120°C |
Technological properties
Property | ||
---|---|---|
Application areas | Exterior | |
Fillers | Mineral Powder | |
Processing methods | Drying Temperature: 80-100°C, Drying Time: 2-4hrs, Melt Temperature: 210-270°C, Nozzle Temperature: 210-270°C, Front - Zone 3 Temperature: 210-270°C, Middle - Zone 2 Temperature: 200-250°C, Rear - Zone 1 Temperature: 190-230°C, Mold Temperature: 15-60°C, Back Pressure: 1-1.5MPa |