General
Property | Temperature | Value | Comment |
---|---|---|---|
Density | 23.0 °C | 1.03 g/cm³ Show Material materials with Density of 1.03 g/cm³ | ASTM D 792 |
Mechanical
Property | Temperature | Value | Comment | ||
---|---|---|---|---|---|
Elastic modulus | 23.0 °C | 1.89 GPa Show Material materials with Elastic modulus of 1.89 GPa | ASTM D 638 | 50 mm/min | ||
Elongation | 23.0 °C | 100.8 % Show Material materials with Elongation of 100.8 % | ASTM D 638 | Type I, 50 mm/min | ||
Elongation at yield | 23.0 °C | 4.7 % Show Material materials with Elongation at yield of 4.7 % | ASTM D 638 | Type I, 50 mm/min | ||
Flexural modulus | 23.0 °C | 1.78 GPa Show Material materials with Flexural modulus of 1.78 GPa | ISO 178 | 2 mm/min, 64mm | ||
Hardness, Shore D | 23.0 °C | 54 [-] Show Material materials with Hardness, Shore D of 54 [-] | ISO 868 | ||
Impact strength, Charpy notched | -30.0 °C | 6 kJ/m² Show Material materials with Impact strength, Charpy notched of 6 kJ/m² | ISO 179/1eA | ||
23.0 °C | 55 kJ/m² Show Material materials with Impact strength, Charpy notched of 55 kJ/m² | ISO 179/1eA | |||
Impact strength, Izod notched | -30.0 °C | 6 kJ/m² Show Material materials with Impact strength, Izod notched of 6 kJ/m² | ISO 180/1A | ||
23.0 °C | 47 kJ/m² Show Material materials with Impact strength, Izod notched of 47 kJ/m² | ISO 180/1A | |||
Impact strength, Izod notched, ASTM | 23.0 °C | 510 J/m Show Material materials with Impact strength, Izod notched, ASTM of 510 J/m | ASTM D 256 | ||
Tensile strength | 23.0 °C | 12 MPa Show Material materials with Tensile strength of 12 MPa | ASTM D 638 | Type I, 50 mm/min | ||
Yield strength | 23.0 °C | 17 MPa Show Material materials with Yield strength of 17 MPa | ASTM D 638 | Type I, 50 mm/min | ||
Impact strength, Izod unnotched, ASTM | No break @ 23°C | ASTM D 4812 |
Thermal
Property | Temperature | Value | Comment |
---|---|---|---|
Coefficient of thermal expansion | 23.0 °C | 3.2E-5 1/K Show Material materials with Coefficient of thermal expansion of 3.2E-5 1/K | ISO 11359-2 | -30°C to 100°C |
Coefficient of thermal expansion, transverse | 23.0 °C | 1.72E-4 1/K Show Material materials with Coefficient of thermal expansion, transverse of 1.72E-4 1/K | ISO 11359-2 | -30°C to 100°C |
Heat deflection temperature, 1.80 MPa | 53 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 53 °C | ASTM D 648 | 1.82 MPa, 3.2 mm | |
Vicat softening temperature | 122 °C Show Material materials with Vicat softening temperature of 122 °C | ISO 306 | 10N, 50°C/hr |
Rheological Properties
Property | Temperature | Value | Comment |
---|---|---|---|
Melt mass-flow rate | 21 g/10min Show Material materials with Melt mass-flow rate of 21 g/10min | ISO 1133 | 230°C/2.16 kg | |
Shrinkage | 23.0 °C | 0.6 % Show Material materials with Shrinkage of 0.6 % | SABIC method | 30 min, 120°C |
Shrinkage, transverse | 23.0 °C | 0.9 % Show Material materials with Shrinkage, transverse of 0.9 % | SABIC method | 30 min, 120°C |
Technological properties
Property | ||
---|---|---|
Application areas | Exterior,Recreational Vehicle | |
Fillers | Mineral Powder | |
Processing methods | Drying Temperature: 80-100°C, Drying Time: 2-4hrs, Melt Temperature: 210-270°C, Nozzle Temperature: 210-270°C, Front - Zone 3 Temperature: 210-270°C, Middle - Zone 2 Temperature: 200-250°C, Rear - Zone 1 Temperature: 190-230°C, Mold Temperature: 15-60°C, Back Pressure: 1-1.5MPa |