MULTIFLEX™ G45 A 21 B Z2487 N0033 (A)

Want to keep this datasheet? Save it now in your required format

This material data has been provided by Matmatch.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts





23.0 °C

1.14 g/cm³

Show Material materials with Density of 1.14 g/cm³

ISO 1183



Compression set

23.0 °C

10 [-]

Show Material materials with Compression set of 10 [-]

ISO 815

70.0 °C

23 [-]

Show Material materials with Compression set of 23 [-]

ISO 815

100.0 °C

41 [-]

Show Material materials with Compression set of 41 [-]

ISO 815


23.0 °C

500 %

Show Material materials with Elongation of 500 %

ISO 527-1/-2

Hardness, Shore A

23.0 °C

50 [-]

Show Material materials with Hardness, Shore A of 50 [-]

ISO 7619-1 | 3 seconds

Tear strength

23.0 °C

23 kN/m

Show Material materials with Tear strength of 23 kN/m

ISO 34-1

Tensile strength

23.0 °C

5 MPa

Show Material materials with Tensile strength of 5 MPa

ISO 527-1/-2

Technological properties



Processing methods

Drying Recommended: no, Melt Temperature Optimum: 200°C, Mold Temperature Optimum: 40°C, Min. mold temperature: 20°C, Max. mold temperature: 60°C, Hold pressure range: as low as possible, Back pressure: 1MPa