Hytrel® HTR8223 BK320

Alternative and trade names
Want to keep this datasheet? Save it now in your required format


Common features of Hytrel® thermoplastic polyester elastomer include mechanical and physical properties such as exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures. In addition, it resists many industrial chemicals, oils and solvents. Special grades include heat stabilised, flame retardant, food contact compliant, blow molding and extrusion grades. Concentrates offered include black pigments, UV protection additives, heat stabilisers, and flame retardants.Hytrel® thermoplastic polyester elastomer is plasticiser free.The good melt stability of Hytrel® thermoplastic polyester elastomer normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-24 kJ/g of base polymer) in appropriately equipped installations.For disposal, local regulations have to be observed.Hytrel® thermoplastic polyester elastomer typically is used in demanding applications in the automotive, fluid power, electrical/electronic, consumer goods, appliance and power tool, sporting goods, furniture, industrial and off-road transportation/equipment industry.Hytrel® HTR8223 BK320 is designed for blow molding or processing techniques requiring high melt viscosity. It has nominal hardness of 42D.Typical applications:Constant velocity joint boots.

This material data has been provided by Matmatch.

"Typical" values were obtained via a literature search. "Predicted" values were imputed via artificial intelligence technology. While we have placed significant efforts in ensuring data accuracy, "typical" and "predicted" data should be considered indicative and verified by appropriate material testing. Please do contact us if additional information on the the predicted data method is required.
All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.





23.0 °C

1.13 g/cm³

Show Material materials with Density of 1.13 g/cm³

ISO 1183

Water absorption

23.0 °C

0.6 %

Show Material materials with Water absorption of 0.6 %

Sim. to ISO 62 | Immersion 24h



Elastic modulus

23.0 °C

0.07 GPa

Show Material materials with Elastic modulus of 0.07 GPa

ISO 527-1/-2


23.0 °C

680 %

Show Material materials with Elongation of 680 %

ISO 527-1/-2

Flexural modulus

23.0 °C

0.08 GPa

Show Material materials with Flexural modulus of 0.08 GPa

ISO 178

Hardness, Shore D

23.0 °C

42 [-]

Show Material materials with Hardness, Shore D of 42 [-]

max., ISO 7619-1

Impact strength, Charpy notched

-40.0 °C

110 kJ/m²

Show Material materials with Impact strength, Charpy notched of 110 kJ/m²

No Break @ 23°C, ISO 179/1eU

Poisson's ratio

23.0 °C

0.49 [-]

Show Material materials with Poisson's ratio of 0.49 [-]

Tear strength

23.0 °C

124 kN/m

Show Material materials with Tear strength of 124 kN/m

ISO 34-1

Tear strength, transverse

23.0 °C

130 kN/m

Show Material materials with Tear strength, transverse of 130 kN/m

ISO 34-1

Tensile strength

23.0 °C

26 MPa

Show Material materials with Tensile strength of 26 MPa

ISO 527-1/-2

Impact strength, Izod unnotched

No Break @ -40,-50°C, ISO 180/1A



Brittleness temperature

-100 °C

Show Material materials with Brittleness temperature of -100 °C

ISO 974

Coefficient of thermal expansion

23.0 °C

1.7E-4 1/K

Show Material materials with Coefficient of thermal expansion of 1.7E-4 1/K

ISO 11359-1/-2

Coefficient of thermal expansion, transverse

23.0 °C

1.7E-4 1/K

Show Material materials with Coefficient of thermal expansion, transverse of 1.7E-4 1/K

ISO 11359-1/-2

Glass transition temperature

-50 °C

Show Material materials with Glass transition temperature of -50 °C

ISO 11357-1/-2 | 18°F/min

Melting point

195 °C

Show Material materials with Melting point of 195 °C

ISO 11357-1/-3 | 18°F/min

Thermal diffusivity

23.0 °C

0 mm²/s

Show Material materials with Thermal diffusivity of 0 mm²/s

Vicat softening temperature

150 °C

Show Material materials with Vicat softening temperature of 150 °C

ISO 306 | 90°F, 2 lbf


FMVSS Class: B -, Burning rate, Thickness 1 mm: <80 mm/min



Comparative tracking index

23.0 °C

600 V

Show Material materials with Comparative tracking index of 600 V

IEC 60112

Dielectric strength

23.0 °C

18 kV/mm

Show Material materials with Dielectric strength of 18 kV/mm

IEC 60243-1

Dissipation factor, 100Hz

23.0 °C

7E-3 [-]

Show Material materials with Dissipation factor, 100Hz of 7E-3 [-]

IEC 62631-2-1

Dissipation factor, 1MHz

23.0 °C

0.01 [-]

Show Material materials with Dissipation factor, 1MHz of 0.01 [-]

IEC 62631-2-1

Surface resistivity

23.0 °C

2.00E+14 Ω/sq

Show Material materials with Surface resistivity of 2.00E+14 Ω/sq

IEC 62631-3-2

Volume resistivity

23.0 °C

9.00E+12 Ω·cm

Show Material materials with Volume resistivity of 9.00E+12 Ω·cm

IEC 62631-3-1

Rheological Properties


Melt mass-flow rate

13 g/10min

Show Material materials with Melt mass-flow rate of 13 g/10min

ISO 1133 | 230°C/10kg

Melt volume-flow rate

10 cm³/10min

Show Material materials with Melt volume-flow rate of 10 cm³/10min

ISO 1133


23.0 °C

1.6 %

Show Material materials with Shrinkage of 1.6 %

ISO 294-4, 2577

Shrinkage, transverse

23.0 °C

1.6 %

Show Material materials with Shrinkage, transverse of 1.6 %

ISO 294-4, 2577

Technological properties

Processing methods

Drying Recommended: yes, Drying Temperature: 100°C, Drying Time, Dehumidified Dryer: 3-4h, Processing Moisture Content: ≤0.08%, Melt Temperature Optimum: 230°C, Min. melt temperature: 220°C, Max. melt temperature: 240°C, Mold Temperature Optimum: 45°C, Min. mold temperature: 40°C, Max. mold temperature: 50°C