Hytrel® HTR8163HVBK

Alternative and trade names
TPC-ET
Want to keep this datasheet? Save it now in your required format

Description

Common features of Hytrel® thermoplastic polyester elastomer include mechanical and physical properties such as exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures. In addition, it resists many industrial chemicals, oils and solvents. Special grades include heat stabilised, flame retardant, food contact compliant, blow molding and extrusion grades. Concentrates offered include black pigments, UV protection additives, heat stabilisers, and flame retardants. Hytrel® thermoplastic polyester elastomer is plasticiser free.The good melt stability of Hytrel® thermoplastic polyester elastomer normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-24 kJ/g of base polymer) in appropriately equipped installations.For disposal, local regulations have to be observed.Hytrel® thermoplastic polyester elastomer typically is used in demanding applications in the automotive, fluid power, electrical/electronic, consumer goods, appliance and power tool, sporting goods, furniture, industrial and off-road transportation/equipment industry.Hytrel® HTR8163HVBK is a 65 nom. Shore D, heat stabilised, plasticiser free high performance resin for extrusion; low temperature impact, excellent heat ageing, fatigue and crack propagation resistance; for air brake tubes.

This material data has been provided by Matmatch.

All metrics apply to room temperature unless otherwise stated. SI units used unless otherwise stated.
Equivalent standards are similar to one or more standards provided by the supplier. Some equivalent standards may be stricter whereas others may be outside the bounds of the original standard.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Properties

General

PropertyTemperatureValueComment

Density

23.0 °C

1.23 g/cm³

Show Material materials with Density of 1.23 g/cm³

ISO 1183

Mechanical

PropertyTemperatureValueComment

Elastic modulus

23.0 °C

0.34 GPa

Show Material materials with Elastic modulus of 0.34 GPa

ISO 527-1/-2

Elongation

23.0 °C

480 %

Show Material materials with Elongation of 480 %

ISO 527-1/-2

Elongation at yield

23.0 °C

30 %

Show Material materials with Elongation at yield of 30 %

ISO 527-1/-2

Flexural modulus

23.0 °C

0.35 GPa

Show Material materials with Flexural modulus of 0.35 GPa

ISO 178

Hardness, Shore D

23.0 °C

64 [-]

Show Material materials with Hardness, Shore D of 64 [-]

max., ISO 7619-1

Impact strength, Charpy notched

-40.0 °C

8.5 kJ/m²

Show Material materials with Impact strength, Charpy notched of 8.5 kJ/m²

ISO 179/1eA

-6.0 °C

12 kJ/m²

Show Material materials with Impact strength, Charpy notched of 12 kJ/m²

ISO 179/1eA

23.0 °C

130 kJ/m²

Show Material materials with Impact strength, Charpy notched of 130 kJ/m²

ISO 179/1eA

Impact strength, Izod unnotched

-40.0 °C

7.5 kJ/m²

Show Material materials with Impact strength, Izod unnotched of 7.5 kJ/m²

No Break @ 23°C, ISO 179/1eU

Poisson's ratio

23.0 °C

0.48 [-]

Show Material materials with Poisson's ratio of 0.48 [-]

Tear strength

23.0 °C

200 kN/m

Show Material materials with Tear strength of 200 kN/m

ISO 34-1

Tear strength, transverse

23.0 °C

185 kN/m

Show Material materials with Tear strength, transverse of 185 kN/m

ISO 34-1

Tensile strength

23.0 °C

44 MPa

Show Material materials with Tensile strength of 44 MPa

ISO 527-1/-2

Yield strength

23.0 °C

21 MPa

Show Material materials with Yield strength of 21 MPa

ISO 527-1/-2

Thermal

PropertyTemperatureValueComment

Brittleness temperature

-70 °C

Show Material materials with Brittleness temperature of -70 °C

ISO 974

Coefficient of thermal expansion

23.0 °C

2.2E-4 1/K

Show Material materials with Coefficient of thermal expansion of 2.2E-4 1/K

ISO 11359-1/-2

Coefficient of thermal expansion, transverse

23.0 °C

1.7E-4 1/K

Show Material materials with Coefficient of thermal expansion, transverse of 1.7E-4 1/K

ISO 11359-1/-2

Heat deflection temperature, 0.45 MPa

85 °C

Show Material materials with Heat deflection temperature, 0.45 MPa of 85 °C

ISO 75-1/-2

Melting point

210 °C

Show Material materials with Melting point of 210 °C

ISO 11357-1/-3 | 18°F/min

Specific heat capacity

23.0 °C

2090 J/(kg·K)

Show Material materials with Specific heat capacity of 2090 J/(kg·K)

of melt

Vicat softening temperature

196 °C

Show Material materials with Vicat softening temperature of 196 °C

ISO 306 | 90°F, 2 lbf

Flammability

FMVSS Class: SE -, Burning rate, Thickness 1 mm: 17 mm/min

Rheological Properties

PropertyTemperatureValueComment

Melt volume-flow rate

5 cm³/10min

Show Material materials with Melt volume-flow rate of 5 cm³/10min

ISO 1133

Shrinkage

23.0 °C

1.9 %

Show Material materials with Shrinkage of 1.9 %

ISO 294-4, 2577

Shrinkage, transverse

23.0 °C

1.8 %

Show Material materials with Shrinkage, transverse of 1.8 %

ISO 294-4, 2577

Technological properties

Property
Processing methods

Drying Recommended: yes, Drying Temperature: 110°C, Drying Time, Dehumidified Dryer: 2-4h, Processing Moisture Content: ≤0.08%, Melt Temperature Optimum: 240°C, Min. melt temperature: 230°C, Max. melt temperature: 260°C, Mold Temperature Optimum: 45°C, Min. mold temperature: 45°C, Max. mold temperature: 55°C