General
Property | Temperature | Value | Comment |
---|---|---|---|
Density | 23.0 °C | 0.92 g/cm³ Show Material materials with Density of 0.92 g/cm³ | ISO 1183 |
Mechanical
Property | Temperature | Value | Comment |
---|---|---|---|
Compression set | 23.0 °C | 26 [-] Show Material materials with Compression set of 26 [-] | ISO 815 |
Elongation | 23.0 °C | 750 % Show Material materials with Elongation of 750 % | ISO 527-1/-2 |
Hardness, Shore A | 23.0 °C | 68 [-] Show Material materials with Hardness, Shore A of 68 [-] | ISO 7619-1 | 3 seconds |
Tear strength | 23.0 °C | 33 kN/m Show Material materials with Tear strength of 33 kN/m | ISO 34-1 |
Tensile strength | 23.0 °C | 8 MPa Show Material materials with Tensile strength of 8 MPa | ISO 527-1/-2 |
Technological properties
Property | ||
---|---|---|
Processing methods | Drying Recommended: no, Melt Temperature Optimum: 200°C, Mold Temperature Optimum: 40°C, Min. mold temperature: 20°C, Max. mold temperature: 60°C, Hold pressure range: as low as possible, Back pressure: 1MPa |